Advantest D3186-13-15-72 Pulse Pattern Generator 150 Mbps to 12 Gbps

The Q7750 optocope (optical network analyzer) is a revolutionary device for measuring optical transmission characteristics.

It can measure the amplitude/dispersion/group delay characteristics of incident and reflected light 

from optical devices at high speed and high resolution over the optical carrier frequency range.

In addition, it can easily measure various chromatic dispersion characteristics, including the zero-dispersion

characteristics and dispersion slope characteristics of dispersion-shifted or non-zero-dispersion fibers.

Measurement using the phase-shift method enables high optical frequency resolution and wide dynamic range.

Batch Measurement of Optical Transmission Characteristics in the Optical Carrier Frequency Range

The Q7750 is equipped with a variable wavelength light source.

The Q7750 is equipped with a variable wavelength light source that enables simultaneous measurement of transmission 

and reflection characteristics in the optical carrier frequency range by scanning a series of wavelengths (optical frequencies) (S21 and S11 as S-parameters).

The measurement parameters are shown in the table below. These parameters can be measured simultaneously in a single scan.

Outstanding signal purity

The U3661's local oscillator is equipped with a precision synthesizer that achieves a signal purity 

of -100 dBc/Hz (at frequencies ≤3.2 GHz and an offset frequency of 10 kHz). 

It meets a variety of needs, from adjacent channel leakage power measurements at radio facilities to microwave equipment evaluation.

Average power

Digital mobile communication systems use modulation patterns that can handle signals with large amplitude variations.

Therefore, we have included an average power calculation function that allows power measurement of signals with amplitude variations.

Total Power

For spread spectrum signals used in CDMA or wireless LANs, the total power measurement function is essential. 

This function consists of two modes: a channel mode for measuring the in-band power specified in the measurement window,

and a total power mode for measuring the total power over the entire measurement span.

Recommended Products P/N：

KH3-94040   SNT-N11V 030611_ 400222792_ A030611B_ 1

Lot of 3 Fujikura MCX Right Angle Female Cab

Lot of 9 Fujikura SMB Right Angle Female Cab

MINT CONDITION ADVANTEST R3755 Network Analyzer _AVAILABLE

MINT CONDITION ADVANTEST WBL-H371030CONT SYSTEM POWER INPU

Network Analyzer_R3762BH_300k-3

ONE ADVANTEST R6144 Fedex DHL Ship

Q8172 ADVANTEST OPTICAL CHANNEL SELECTOR _12

Q8172 ADVANTEST OPTICAL CHANNEL SELECTOR _30

R3272 ADVANTEST ANALYSEUR DE SPECTRE 9KHZ 26_5

R49446A ADVANTEST Socket Module

R6243 ADVANTEST 60Hz DC VOLTAGE CURRENT SOURCE MONI

SAC3750D   POWER SUPPLY ADVANTEST 270V AC DC

SAC3750G   POWER SUPPLY ADVANTEST 240V 17A A

R6452A ADVANTEST DIGITAL MULTIMETER

Cable ADVANTEST DCB-ESC061X01A-1

Cable ADVANTEST DCB-ESC074X01C Cable LD P&P M6771

E7944-68501   PCB INTERFACE FOR CE SERIES

E7944-69533   BOARD CHANNEL CE   ADVANTEST

Electrometer ADVANTEST R8252 premium price Sold out

For Parts Advantest TR6143 DC Voltage and Current

HV_ Advantest Q8214A optical power meter & Q82032A

KH3-71383   POWER CONVERTER 1PHASE 2WIRE 200V

D3286 ADVANTEST DIGITAL TRANSMISSION TESTER 12GB S

D5115 ADVANTEST MULTIMEDIA PROTOCOL ANALYZER