Beckhoff CX2100-0004 | Power supply unit for CX2033, 45 W

The CX2033 is a modularly expandable Embedded PC for DIN rail mounting

and has an AMD Ryzen™ V1202B CPU with a clock speed of 2.3 GHz and

two cores. The power supply unit required for operation enables the direct

use and connection of all Beckhoff I/O components to this CPU module.

The TwinCAT automation software turns the CX2033 system into a high-

performance PLC and motion control system that can be used with or without

visualization. Both TwinCAT 2 in 32-bit mode and the latest TwinCAT 3 version

in 64-bit mode are supported.

Continuing support for TwinCAT 2 by the CX2033 and CX2043 guarantees

investment protection for projects and systems that were or will be created

with this 32-bit generation.

The devices from the CX20x3 series are characterized by outstanding real-time

characteristics under the highest computing loads.

This enables deterministic processing with short cycle times on the individual

cores of the CPUs.

The basic equipment of the hardware includes two independent Gbit-Ethernet

interfaces, four USB 3.2 Gen. 2 ports, one DVI-D interface, and a multi-option

interface that can be equipped ex factory with a flexible choice of further

interfaces (e.g., serial port, fieldbus, or second video connection).

The internal RAM size is 8 GB; up to 16 GB are also optionally possible. 

The controller boots from the CFast card and has an internal 128 kB NOVRAM

for use as a persistent data memory.

The CX2033 is fanless and has no rotating components. Cooling takes place

by passive thermal convection.

The CX2500-Bxxx fieldbus slave modules are left-sided attachments

for the Embedded PC series CX20xx, CX52x0. CX53x0 and CX56x0.

The use of systems with fieldbus slave modules enables the use of

a CX system as a subordinate local controller for the construction of

complex or modular systems. External process data are received from

the master and processed, or data from its own process peripherals

are returned to the master controller directly or processed.

The CX2500-B310 fieldbus slave module assumes the function of a

PROFIBUS slave. Each module occupies a PCI Express® lane, so that

a total of four of these modules can be connected in any desired

combination to the left side of a CX20xx group. The fieldbus slave

modules are single-channel modules. The CX2500-B310 fieldbus slave

module for PROFIBUS can present itself to the master as a multiple

(max. quadruple) virtual slave station, resulting in a four-fold increase

in the quantity of exchanged process data.

Beckhoff CPU module CX5140-0155/4 GB CPU module by Beckhoff for industry

Beckhoff CX1030-0122/000002818 CPU module

Beckhoff AMP8043-H042-0000

Beckhoff ELM3504-0000 Measuring Bridge Full/Half/Quarter Bridge 24 Bit

Beckhoff CX5010-0121 CPU Module CX5010 + CX1900-0027 4GB

Beckhoff Servo Motor AM8042-0F10-0000 AM80420F100000

Terasaki EMW-1101A K/834/5-001B Cpu & Ram Rom Module

Modulo Cpu E Ram Rom Terasaki EMW-1101A K/834/5-001B

ABB EL3040 GAS ANALYZER PANEL

Pannello Analizzatore Di Gas ABB EL3040

ABB EL3040 GAS ANALYSIS PANEL

ABB KENT-TAYLOR ZIRCONIA ZMT OXYGEN ANALYZER PANEL ZMT/231/000000 /4112

ABB Kent-Taylor Zirconia ZMT Oxygen Analyzer Panel ZMT/231/000000/4112