Honeywell CC-PAON01 Analog Output Module

Analog Output – CC-PAON01 

Function 

The Analog Output (AO) Module delivers high-level constant current to actuators and recording/indicating devices.

Notable Features 

• Extensive self-diagnostics 

• Optional redundancy 

• Safe-state (FAILOPT) behaviors configurable on a per channel basis

• Output read-back and alarm on discrepancy

• Non-incendive output

variables 

• Safe-state (FAILOPT) behaviors configurable on a 

per channel basis 

• Output read-back and alarm on discrepancy 

• Non-incendive output 

FAILOPT 

Series C AO module supports the FAILOPT parameter on a per channel basis. The user can configure each channel to 

either HOLD LAST VALUE, or SHED to a SAFE VALUE. The Output will always go to zero, the safe state, if the IOM 

device electronics fails. 

Open-wire Detection 

This Series C IO function will be able to detect and annunciate open field wire with a Channel Soft Failure indication. 

Analog Input –––– Single Ended 

Function 

The Analog Input Module accepts current inputs from transmitters and sensing devices. 

Sensor Drive Modules

Two sensor drive modules are provided:

a. Sensor Drive Module, 4 - 20mA, Part Number 05701-A-0283

b. Sensor Drive Module Catalytic, Part Number 05701-A-0284

The Sensor Drive Module conditions the incoming catalytic or 4 -20mA sensor signal and provides the necessary sensor power supply.

It contains all the circuitry necessary to generate the voltages and currents required to drive the sensor,

the circuitry to acquire the sensor signal and to scale the sensor signal to a standard output. 

The sensor drive modules are factory fitted and plug directly onto the channel control card.

Series 8 I/O Overview 

This document provides technical information to configure the Series 8 I/O. 

The following Series 8 I/O items are included in this document. 

• TC/RTD 

• Analog Input – Single Ended 

• Analog Input with HART – Single Ended 

• Analog Input with HART – Differential 

• Analog Output 

• Analog Output with HART 

• Digital Input Sequence of Events (SOE) 

• Digital Input, 24 VDC 

• Digital Input Pulse Accumulation 

• Digital Output, 24 VDC 

• DO Relay Extension Board

Analogue Output Module

An optional Analogue Output Module, (Part Number 05701-A-0285),

may be factory fitted to the Single Channel Control Card and is used on a channel of gas detection to provide an isolated current loop output which follows the sensor signal level. 

This may be set electronically to produce a 0 - 20mA output or a 4 - 20mA output and can be used to operate a chart recorder, etc.

Related Items we have in stock

Standard FTA Components

MU-TAIH02 High Level Analog Input/STI with compression terminals

MU-TAIH03 High Level Analog Input/STI with compression terminals

MU-TAIH12 High Level Analog Input/STI with compression terminals

MU-TAIH13 High Level Analog Input/STI with compression terminals

MU-TAIH22 High Level Analog Input/STI with compression terminals

MU-TAIH23 High Level Analog Input with compression terminals

MU-TAIH52 High Level Analog Input/STI with screw terminals

MU-TAIH53 High Level Analog Input/STI with screw terminals

MU-TAIH62 High Level Analog Input/STI with screw terminals

MU-TAIL02 Low Level Analog Input with compression terminals

MU-TAIL03 Low Level Analog Input with compression terminals

MU-TAMR02 LLMux Analog Input RTD with compression terminals

MU-TAMR03 LLMux Analog Input RTD with compression terminals

MU-TAMT02 LLMux Analog Input TC with compression terminals

MU-TAMT03 LLMux Analog Input TC with compression terminals

MU-TAMT12 LLMux Analog Input TC with remote CJR, compress terminals

MU-TAMT13 LLMux Analog Input TC with remote CJR, compress terminals

MU-TAOX02 Analog Output with compression terminals

MU-TAOX12 Analog Output with compression terminals

MU-TAOX52 Analog Output with screw terminals