Eaton 1023843 Power Board B20098140711 A5

Innovative. Intuitive. Accurate. Accessible.

The meters combine state-of-the-art technology with ITIC diagnostics,

waveform capture, data trending and performance benchmarking, along

with a “Twist-and-Click” graphic display: a new paradigm for simplicity

and ease of use in the marketplace. The embedded Web server enables

users to surf to the meter over the Internet via a standard Web browser.

The new platform offers advanced functionality like high-speed impulsive

transient capture, 6 MHz sampling rate (100.000 samples per cycle),

anti-aliasing, ITIC analysis and automatic trigger setting, field-upgradeable

firmware, memory up to 8 GB, and optional digital, relay and solid-state I/O.

Eaton’s Power Xpert Quality (PXQ) event analysis system is a

state-of-the-art power quality monitoring instrument designed

for power distribution assemblies like low and medium voltage

switchgear and switchboards. Compatible with industry power

quality standards (such as IEC 61000-4-30 Class A and IEEE

1453), this ANSI C12.20 Class 0.1 metering device offers advanced

analytics at the edge that simplify troubleshooting of power-quality

events. A highly modular approach provides maximum flexibility

to configure a metering system that can grow with the application

it is monitoring.

Core features

• Industry exclusive integrated motorized remote racking (MR2) allows

you to connect or disconnect a withdrawable breaker without ever

breaching the arc flash boundary

• Easily and cost effectively perform secondary injection testing with

our intuitive Power Xpert Protection Manager software

• Power and energy metering accuracy of 0.5% with PXR 35

• Embedded communications and metering help to reduce cost by

eliminating the need for separate communication components and

associated wiring.  Easily connect and push actionable data through

our Power Xpert Dashboards, Modbus RTU, CAMs, or integrated ethernet

(IEC 61850) with PXR 35

• Breaker health and advanced algorithms help avoid costly downtime by

enabling you to perform predictive and preventative maintenance on your

power distribution system prior to component failure

• Capture and view extended waveforms from multiple devices with

synchronized event captures. This allows you to see how a specific event

affected multiple devices with PXR 35 in your gear

• Arc flash reduction maintenance system helps to reduce your arc flash

level energy, reducing your PPE, which helps minimize risk and improves

your personnel safety and productivity

• Multiple load alarms and ground fault alarm to help avoid costly downtime

through predictive and preventative maintenance

Redundant power paths assure high fault-tolerance and optimum uptime.

Galvanic isolation separates input from output, filtering line noise and surges.

FERRUPS also features precision voltage regulation with no battery discharge

down to 38% below nominal (depending upon load) as well as over 80 user-

programmable diagnostic and communications functions.

FERRUPS models include free Eaton Software Suite power management

software with connectivity cable and are BestLink SNMP/Web-ready for remote

management.

FERRUPS covers up to $250.000 for damage to connected equipment resulting

from a spike or surge (US and Canada only).

Eaton’s Cutler-Hammer FP-4000 Feeder Protection Relay provides complete

3-phase and ground overcurrent and voltage protection plus metering. It may

be used as primary protection on feeders, mains and tie circuit breaker

applications, and as backup protection for trans formers, high voltage lines

and differential protection. The relay is most commonly used on medium

voltage switchgear applications. The FP-4000 takes full advantage of its

microprocessor technology, providing the user new freedoms and a wealth

of data-gathering features. The relay performs self-checking of all major

hardware and firmware protection elements to ensure their operation in the

event of a system or component electrical failure or fault. Protection functions

are well suited for main and distribution feeder circuit applications.