ABB AI02J Analog Input Module

Each PRP node, called a double attached node with PRP (DAN), is attached to two

independent LANs operated in parallel. These parallel networks in PRP are called LAN

A and LAN B. The networks are completely separated to ensure failure independence, and

they can have different topologies. Both networks operate in parallel, 

thus providing zerotime recovery and continuous checking of redundancy to avoid communication failures.

Non-PRP nodes, called single attached nodes (SANs), are either attached to one network

only (and can therefore communicate only with DANs and SANs attached to the same

network), or are attached through a redundancy box, a device that behaves like a DAN.

additional PRP information from the Ethernet frames. In some cases, default PC

workstation adapters are not able to handle the maximum-length Ethernet frames with the

PRP trailer.

Protection functions

The IED offers directional and non-directional overcurrent and thermal overload protection as

well as directional and non-directional earth-fault protection. 

Some standard configurations allow as an option admittance-based, harmonics-based or wattmetric-based earth-fault protection to be

used in addition to directional earth-fault protection. 

Further, the IED features sensitive earth-fault protection, phase discontinuity protection, transient/intermittent earth-fault protection, 

overvoltage and undervoltage protection, residual overvoltage protection, positive-sequence undervoltage 

and negativesequence overvoltage protection. 

The outstanding I/O capability in REC670 enables control of several bays with complete measurement with only one IED. 

For instance, one REC670 IED is capable of handling control of all apparatuses 

in one entire diameter in 1 ½ breaker arrangement including breaker failure protection for all breakers.