Honeywell 900S50-0360-00 I/O Scanner (for remote rack)

Overview 

The Honeywell ControlEdge HC900 Controller is an advanced loop and logic controller offering a modular 

design sized to satisfy the control and data acquisition needs of a wide range of process equipment.

Remote Terminal Panels 

Optional DIN rail mounted Remote Terminal Panels (RTPs) are available for use with pre-wired cables to reduce installation time and labor expense. 

Four types of RTPs are available: analog inputs, relay outputs, redundant I/O and other I/O modules. 

Three cable lengths are also available to match hardware to installation variations. 

Analog inputs RTPs include transmitter shunt resistors and transmitter power terminals with individual circuit fuses. 

The Relay Output RTP includes a fuse and power disconnect switch for each output. 

All the three types of RTP panels also switch power to allow module removal and installation under controller power. 

Terminal Blocks

20-screw Barrier style and Euro style terminal blocks are available for use with all ControlEdge HC900 I/O Modules. 

Red terminal blocks are used for high voltage connections for added safety while black terminal blocks are used for low voltage connections. 

A 36-terminal Euro style block is available with the 16 AI, the 8 and 16 AO as well as the 32 DC DI and 32 DC DO module types.

Series 8 I/O Overview 

This document provides technical information to configure the Series 8 I/O. 

The following Series 8 I/O items are included in this document. 

• TC/RTD 

• Analog Input – Single Ended 

• Analog Input with HART – Single Ended 

• Analog Input with HART – Differential 

• Analog Output 

• Analog Output with HART 

• Digital Input Sequence of Events (SOE) 

• Digital Input, 24 VDC 

• Digital Input Pulse Accumulation 

• Digital Output, 24 VDC 

• DO Relay Extension Board

Definitions 

• Input Output Termination Assembly (IOTA): An assembly that holds the IOM and the connections for field wiring; 

• Input Output Module (IOM): A device that contains most of the electronics required to perform a specific I/O function. 

The IOM plugs onto the IOTA. 

The 900CR HMI performs the functions of a multiple protocol converter, 

using up to four high-speed serial communications ports and one or two 10/100 Base-TX Ethernet ports. 

The SD card slot can be used to collect your trending and datalogging information as well as load the unit's configuration file, 

allowing configuration changes to be made and saved to the card for later transfer. 

The 900 Control Station is available in 4-inch, 7-inch, 10- inch or 15-inch display size. 

All models are configured using Station Designer PC configuration software. 

Station Designer v3.1.7000 offers easy to use drag and drop communications configuration, 

while the embedded image library allows the programmer to create intuitive screens and prompts for the operator. 

The software is available along with the hardware at no additional charge.

Introduction 

The New 900 Control Station (900CR series) operator interface from Honeywell compliments the

ControlEdge HC900 Process & Safety Controller with a unique combination of predefined display

features and custom display development tools to deliver ease of use and high flexibility in an efficient and affordable package. 

The color display and finger touch user interface enhances process monitoring while simplifying online controller changes. 

The Station Designer software used to configure the interface works in conjunction with 

the ControlEdge HC900 Controller configuration software to automatically build a Control 

Station database that exactly matches the unique, user configured, controller database. 

This highly integrated operation eliminates the time-consuming task of assigning controller communication

register addresses to the operator interface parameters used to build displays.

The standard database of the Control Station allows all available controller tags to be 

imported without restriction or costly price adders, eliminating the risk of running out of tag resources in the middle of your project.

The hardware of the 900 Control Station is designed to handle tough industrial environments 

with polycarbonate case design and water tight, type 4X/IP66, front bezel assembly. and active alarm status. 

The new 900CR is the perfect solution for applications that require the operator to monitor and control more than just a single device.

 With up to four serial ports and two Ethernet ports, 

these HMI displays can connect to multiple serial and Ethernet devices simultaneously, including variable frequency drives, bar code scanners, etc. 

Other advantageous products on sale are listed below:

Honeywell Low Votage RTP Cable (5.0M 16.4ft.) Note 6 (NOT FOR SIL2 SYSTEMS) 900RTC-L150

Honeywell High Voltage RTP Cable (1.0M 3.28ft.) Note 6 (NOT FOR SIL2 SYSTEMS) 900RTC-H110

Honeywell Digital In 120/240VAC 125VDC (16ch Iso) 900TCK-0001

Honeywell Digital Output Relays ( 8 channel) 900TER-0001 900TBR-0001

Honeywell Digital Output 24VDC (16 Channel) 900TEK-0001 900TBK-0001

Honeywell Digital Output 120/240 VAC (8 channel) 900TER-0001

Honeywell 900RTC-L010 Remote Terminal Low Voltage Cable Assembly 1.0 meters long

Honeywell High Voltage RTP Cable (2.5M 8.2ft.) Note 6 (NOT FOR SIL2 SYSTEMS) 900RTC-H125

Honeywell High Votage RTP Cable (5.0M 16.4ft.) Note 6 (NOT FOR SIL2 SYSTEMS) 900RTC-H150

Honeywell LV RTP Cable (32/16 channel) (1.0M 3.28ft) Note 6 (NOT FOR SIL2 SYSTEMS) 900RTC-3310

Honeywell LV RTP Cable (32/16 channel) (2.5M 8.2ft) Note 6 (NOT FOR SIL2 SYSTEMS) 900RTC-3325

Honeywell LV RTP Cable (32/16 channel) (5.0M 16.4ft) Note 6 (NOT FOR SIL2 SYSTEMS) 900RTC-3350

Honeywell 8 ch A/O RTP Cable (1.0M 3.3ft) Note 6 (NOT FOR SIL2 SYSTEMS) 900RTC-B910

Honeywell 8 ch A/O RTP Cable (2.5M 8.2ft) Note 6 (NOT FOR SIL2 SYSTEMS) 900RTC-B925

Honeywell 8 ch A/O RTP Cable (5.0M 16.4ft) Note 6 (NOT FOR SIL2 SYSTEMS) 900RTC-B950

Honeywell Filler Block Terminal Cover 900TNF-0101

Honeywell Shield Terminal Strip (package of 2) 900TSS-0001

Honeywell Terminal board jumpers (10 two pos jumpers) Note 4 900J02-0001

Honeywell Terminal board jumpers (10 ten pos.jumpers) Note 4 900J10-0001

Honeywell Analog Input (8 channel) 900TEK-0001 900TBK-0001

Honeywell Analog Output 0 to 20mA (4 channel) 900TEK-0001 900TBK-0001

Honeywell Analog Output 0 to 20mA (8 channel) 900TCK-0001

Honeywell Analog Output 0 to 20mA (16 channel) 900TCK-0001

Honeywell Digital Input Contact type (16 channel) 900TEK-0001 900TBK-0001

Honeywell Digital Input 24VDC (16 channel) 900TEK-0001 900TBK-0001

Honeywell Digital Input 120/240 VAC (16 channel) 900TER-0001 900TBR-0001