ABB 2VAA008425R1 RMU610 Base for redundant cRBX01

The S200 OV Miniature circuit breaker is the perfect solution for a complete protection against overcurrent and shortcircuit. 

This serie ensure, at any time and under any condition, the safety of all facilities and related equip ment.

Main technical features 

• S200 OV is a 2P, 3P and 3P+N MCB compliant to product standard IEC/EN 60898-1 and with the following main technical features: 

• Breaking capacity 10 kA 

• Tripping characteristics OV 

• Rated current from 25 to 63 A

processor load

• Optical communication

• Industrial grade hardware with no moving parts

• Long life cycle, easy upgrading

• Robust reliance file system, insusceptible post power loss

07EA90-SI ABB modules are used to convert analog signals to digital signals and transmit them to 

the control system for monitoring and controlling industrial processes.

These accuracy settings are only used when negotiating for time mastership with 

other nodes in the underlying Harmony control network.

CO22 Series 

200 A (main lugs), 200 A per position, single-phase 120/240 V; 

multiple position combination with or without breaker

Product specifications

• Conductor range: line: 6 AWG–250 kcmil, load side 

Conductor range: for ABB SACE A1A/A1N:4-1AWG 

or ABB SACE A2A/A2N:1 AWG-250 kcmil. For other 

approved circuit breakers, see manufacturer 

specifications. For load side,neutral side, 

conductor range: 6AWG-250 kcmil 

• Aluminum tunnel type connectors for both load and line sides

• For overhead and underground services

• Factory pre-bussed from main lugs to each position

• Supplied with hub opening closure plate for underground service

• Internal locking system for covers 

• Supplied with screw type sealing rings

• Factory installed 2 pole 10KA OR 22 KA (HI) breakers either Siemens or ABB 

• Eaton type ED breakers

• Comes with adjustable breaker plate to accept installation of Siemens

 type QJ,QJH,QR,QRH, Eaton type ED and SQD type QB

• Conductor kits are available to facilitate field installtion of Siemens 

type QJ,QJH,QR,QRH, Eaton type ED and SQD type QB, refer to page D65

• Weatherproof Type 3R enclosure

Features and benefits

Termination for up to eight (8) analog I/O process signals within a horizontal row.

All SD I/O modules & bases of all types (Singular or Redundant) AND (Compact or Full-size), are

100% fully compatible with each other. Thus, Singular & Redundant, Compact or Full-size I/O

modules can be mounted within a single, common HN800 I/O bus.

Optional mechanical keying can be implemented to prevent insertion of the wrong I/O module type.

Latching device on the base locks the base into position on DIN-Rail.

Industry standard 35-mm DIN rail, Horizontal row mounting.

You may need the following additional products：