ABB 1SBP260054R1001 ICMK14F1 Remote Unit

ICMK14F1 Remote Unit

Manufacturers

ABB

Model(s)

ABB Advant Controller 31. ABB Advant OCS

Estimated Shipping Size

Dimensions: 4.0" x 4.0" x 5.0"

(10.2 cm x 10.2 cm x 12.7 cm)

Weight: 0 lbs 12.0 oz (0.3kg )

Tariff Code: 8537109060

Country of Origin: France

Ships from Webster NY, USA

All I/O modules provide simple interfacing, accurate -yet fast - control, and easy integration of individual

loops into a comprehensive plant-wide control and supervision system.

The interface modules connect to the process through screw terminals on connection units normally installed inside, at the back of the cabinet.

This solution keeps noise and destructive voltage spikes away from the central electronics and provides a neat and tidy process interface that is easy to maintain.

High disturbance immunity

All modules conform to the highest standards of electromagnetic noise immunity 

and satisfy the requirements of the EU directives 2014/30/EU and 2014/35/EU. 

For the above reasons, S100 I/O is likely to be the best help you can get for putting your control system in touch with your field devices.

Comprehensive self-diagnostics

Comprehensive self-diagnostics continuously monitor the modules and report any errors through LEDs on

the module fronts and through alarm messages and indications to process operator stations.

Malfunctioning inputs can be disabled and simulated by manual entry while failing outputs are deactivated

or driven to a predetermined safe state automatically.

All I/O modules can be replaced while the system is in service. 

Some modules can even be arranged, trans parently into dually redundant configurations forenhanced availability.

Master Update Period

Master update period is the frequency that Harmony Server synchronizes time with 

the underlying Harmony control network. This property is used only when Time 

Synchronization is enabled. The permissible values are 120 to 3540 seconds.

Sending Global Alarm Acknowledgement Messages to the Loop

Enable Tag Acknowledgment Broadcast 

To broadcast an alarm acknowledgement for a specific Harmony tag: 

– Select the Tag Acknowledgment Broadcast Enable check box on the  Harmony Tab of the tag. Selecting the 

checkbox enables the connectivity server to broadcast the alarm  acknowledgement for this tag on the communication highway.