ABB REF615 HCFKAEADABC2BAA11E Feeder Protection and Control

REM620 is a dedicated motor IED perfectly aligned for the protection, control, measurement 

and supervision of medium-size and large asynchronous motors, requiring also differential protection, 

in the manufacturing and process industry. 

REM620 is a member of ABB’s Relion® protection and control product family and its 620 series. 

The 620 series IEDs are characterized by their functional scalability and withdrawable-unit design. 

The 620 series has been designed to unleash the full potential of the IEC 61850 standard for 

communication and interoperability of substation automation devices.

Disturbance recorder function

The three conductor currents, the current in the directly earthed conductor,

binary signals, and the voltages, can be recorded in each BU. 

Recording can be started, for example, by a protection function or an input signal. 

The disturbance recorder data are stored in the REB 500. 

They can be read out directly on the BU or at the central unit in COMTRADE format and stored on the PC. 

An evaluation program (eg, WINEVE) is used for further processing.

REF542plus Multifunction Protection and Switchbay Control Unit integrates all the secondary functions in a single unit. 

This multifunctional unit also features a selfmonitoring function. 

All functions are designed as freely configurable software modules. 

Therefore, a wide range of operation requirements in MV stations can be met without any problems. 

The versatility of the software makes it possible to use the REF542plus on every 

switchboard independent on the specific application required.

Overcurrent-time protection

This is a back-up protection function which is calculated locally in the BU and used to provide simple,

autonomous feeder protection in each BU.

Event recording

All events are stored with a resolution of 1 ms in the central unit and in the BUs.

System, protection and test events can be generated.

Protection events refer to the protected busbar and include the changes in the disconnector and breaker positions,

trips, etc. Test events are recorded during testing with the test signal generator.

System events describe the diagnostic and fault messages of the NBP system as a whole.

REF542plus success story

„ Market launch 2000

„ Delivered units approx. 50,000

„ Applications ranging from low voltage to high voltage

„ In service worldwide

„ Many different protection and control functions

V7865 processor VME single board computer

V7865-ACC-603-RC VME Transition Module for V7865

VMIVME-4116 8-channel 16-bit digital-to-analog converter board

VMIVME-7805 VMEBus SBC Motherboard

VMIVME-2128 Output Module

VMIVME-3100 analog-to-digital conversion module

VMIVME-2170A Isolated Digital Output Module

VMIVME-7740 VME Single Board Computer

VMIVME-2120 64-bit High-Voltage Digital Output Megamodule

VMIVME-4941 Quad-Channel Synchro/Resolver-to-Digital Converter

VMIVME-4116 8-channel 16-bit Digital-to-Analog Converter Board

VMIVME-7696-650  Pentium II Processor-Based VMEbus Single-Board Computer

VMIVME-2210 Specifications

VMIVME-1128 128-bit High-Voltage Digital Input Board with Built-in-Test

XVB603 VME Single Board Computer

VMIVME-4132-010 32-Channel, 12-bit Analog Output Board with Built-In-Test

VMIVME-2540-300  24-Channel Intelligent Counter/Controller

VMIVME-4514A-000 16-Channel Scanning Analog I/O Board

VMIACC-5595-208   Specification 

VMIVME-3122 High-Performance 16-bit Analog-to-Digital Converter

VMIVME-3123 Specifications 

VMIVME-7700 Ultra Low Voltage Intel® Celeron® VMEbus

VMIVME-5531M VMIVME-5531L Specifications