ABB NKLS02-5 Super Loop Cable

Super Loop Cable Manufacturers ABB Model(s) ABB Bailey Infi 90

ABB Bailey Infi 90 and Net 90

Additional Information Infi-net Interface Cable -9 feet. Used to connect INNIS01 to NTCL01, 300V,90xC, #24 AWG

Estimated Shipping Size Dimensions: 15.0" x 3.0" x 15.0" (38.1 cm x 7.6 cm x 38.1 cm)

Weight: 1 lbs 16.0 oz (0.9kg )

Tariff Code: 8544429000

Country of Origin: United States Ships from Webster NY, USA

Super Loop Cable

I/O SYSTEMS - SD SERIES I/O DO05

The DO05 digital output module provides16, CH-2-CH isolated electromechanical relay contact outputs. 

The electromechanical relay contacts are capable of handling up to 3.0 A. 

The module executes at 1 msec cycle and has an average response time of 0.5 msec based on when command is received from controller. 

The DO05 module provides staple jumpers to select between NO or NC contacts.

FC 221 (I/O Device Definition) sets DO module operating parameters and each output channel is configured

using FC 225 (Digital Output CH) to set indivdual output channel parameters such as alarm state setting, 

default state on loss of communication with controller, etc.

processor load

• Optical communication

• Industrial grade hardware with no moving parts

• Long life cycle, easy upgrading

• Robust reliance file system, insusceptible post power loss

07EA90-SI ABB modules are used to convert analog signals to digital signals and transmit them to the control system for monitoring and controlling industrial processes.

These accuracy settings are only used when negotiating for time mastership with 

other nodes in the underlying Harmony control network.

On-board processing capabilities

The process I/O modules are “intelligent” in the sense that module-related signal and data processing is

performed on board as opposed to centrally, by the CPU of the host controller. Time tagging of events,

filtering and gain control are some examples of board-level tasks. 

This functional distribution improves real-time performance and reliability of the 

system as a whole and maintains processing capacity when the system is expanded.

Message Wait Period

Message wait period is the Period that Harmony Server waits before attempting to 

assume time mastership on the control network. This property is used only when 

Time Synchronization is enabled. The permissible values are between 180 and 3660 

seconds. Additionally, the configured value must greater than the Master Update Period.

You may need the following additional products：