ABB NDLS03 Digital Logic Station

Digital Logic Station Manufacturers ABB, Bailey Model(s)

ABB Bailey Infi 90 and Net 90, ABB Bailey Net 90

Estimated Shipping Size Dimensions: 2.0" x 13.0" x 7.0" (5.1 cm x 33.0 cm x 17.8 cm)

Weight: 0 lbs 8.0 oz (0.2kg )

Tariff Code: 8538907080

Country of Origin: United States Ships from Webster NY, USA

Digital Logic Station

Reference variables

The voltage characteristics are shown in the table beside. The DC voltage haracteristics have been calculated using the following assumptions:

–UVN

= rated input terminal voltage, 3-phase

–Voltage tolerance ±10 %

–Internal voltage drop approx. 1%

–If a deviation or a voltage drop has to be taken into consideration in compliance with IEC and VDE standards,

the output voltage or the output current must be reduced by the actual factor according to the table on the right.

ABB DC Industrial Drives

The DCS800 DC industrial drive is the latest drive from ABB, combining the newest control technology

with a thyristor power platform that has been factory-proven all over the world. 

The DCS800 boasts a wider power range than any other DC drive on the market. 

The hardware and software are designed with you, the user in mind. 

Special features make installation and configuration simple and allow you to customize the application to your needs.

Industrial Applications

The DCS800 can be used in a wide range of industrial applications including:

−Metals

− Electrolysis

− Pulp & Paper

− Ski lifts

− Printing

−Magnets

−Material handling

− Food & Beverage

− Battery Chargers

− Test rigs

− Plastic & Rubber

−Mining

Physical Features and Interfaces

Interface layout and types: A wide range of interfaces are available, including digital inputs, digital outputs, analogue inputs and analogue outputs. 

Digital input interfaces are used to connect digital sensors (e.g. limit switches, proximity switches) and digital signal sources,

and digital output interfaces are used to control digital actuators (e.g. relays, indicator lights).

Analogue input interfaces are used to connect analogue sensors (e.g. temperature sensors, pressure sensors)

and analogue output interfaces are used to control analogue actuators (e.g. control valves, frequency converters).

The interface type may be a pin-type interface or a screw terminal interface, which facilitates the connection of different types of wires.

Physical design: The design is generally compact and easy to install in limited spaces such as control cabinets or equipment racks.

The housing is usually made of metal or high-strength engineering plastics, with good impact resistance and heat dissipation performance.

In terms of installation, it may support rail mounting or screw-fixed installation,

which is convenient for users to choose according to the actual installation environment and requirements.

The internal circuit layout is reasonable, taking into account the electromagnetic compatibility and heat dissipation requirements to ensure long-term stable operation.