Part Number IS415UCVGH1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockIS415UCVGH1A is a VME Controller Card manufactured and designed by General Electric as part of the Mark VI Series used in gas turbine control systems. The Intel Ultra Low Voltage Celeron TM 650 MHz processor powering the single-slot UCVG board has 128 MB of flash memory and 128 MB of SDRAM.

Connectivity is provided by two 10BaseT/100BaseTX (RJ-45 connection) Ethernet ports. Peer-to-peer communication and configuration with the UDH are both made possible through the first Ethernet connection. The second Ethernet port can be utilized for private Ethernet Global Data (EGD) networks or Modbus on a different IP logical subnet. The toolbox is used to configure this Ethernet port. Every time the rack is powered up, the controller verifies the toolbox configuration versus the installed hardware.
APPLICATION
The REF543KM127AAAA is a feeder terminal produced by ABB that is used in a wide range of applications.
Designed for protection, control, measurement and monitoring of medium voltage networks,
the device can be used with different types of switchgear, such as single bus,
dual bus and dual machine systems, and supports a variety of network types, including isolated neutral networks,
resonant ground networks and partially grounded networks.
It is especially suitable for the protection and control of medium-sized three-phase asynchronous motors,
as well as the protection and control of shunt capacitor banks for reactive power compensation.
GE 8603-FT-FU Field terminal, non-incendive, fused (Div 2)
GE 8619-FT-MT 44-pin Mass Termination Assembly (Div 2)
GE 8604-FT-FU Field terminal, fused
GE 8620-FT-MT Field terminal assembly
GE 8605-FT-TC Field terminal, thermocouple
GE 8621-FT-IS Intrinsically Safe Field terminal, standard
GE 8606-FT-RT Field terminal, RTD
GE 8622-FT-IS Intrinsically Safe Field terminal, loop-disconnect (not for 8 channel DI)
GE 8607-FT-TC Field terminal, 8-channel with T/C
GE 8623-FT-IS Intrinsically Safe Field terminal for 8220-DI-IS
GE 8608-FT-NI Field terminal, 8-channel, non-incendive
GE 8624-FT-IS Intrinsically Safe Field terminal with loop-disconnect
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved