ABB IPECB13 Power Entry Circuit Breaker

Power Entry Circuit Breaker Manufacturers ABB, Bailey Model(s)

ABB Bailey Infi 90, ABB Bailey Infi 90 and Net 90

Additional Information 24 VDC, 5.6 A, 25.5 VDC OUTPUT, 120/240 VAC, 125 VDC INPUT

Estimated Shipping Size Dimensions: 5.0" x 8.0" x 7.0" (12.7 cm x 20.3 cm x 17.8 cm)

Weight: 4 lbs 15.0 oz (2.2kg )

Tariff Code: 8504409540

Country of Origin: United States Ships from Webster NY, USA

Power Entry Circuit Breaker

Fan Chassis and System Fans

The IPFCH01 Power Fan Chassis mounts two system power fans. There is one types of fan used in

the Modular Power System II. It is the IPFAN14 (120/240 VAC, 125 VDC).

The fan chassis provides a power connection, and fan monitoring and control via a cable connection to the power module chassis backplane.

The power system fans mount side-by-side in the fan chassis.

Hall effect sensors on the power system fans provide fan speed information to the power monitor module.

Fan speed is controlled as a function of cabinet temperature. One fan is capable of cooling the cabinet and a failed fan can be

replaced while the system is on-line.

Features and benefits

Termination for up to eight (8) analog I/O process signals within a horizontal row.

All SD I/O modules & bases of all types (Singular or Redundant) AND (Compact or Full-size), are

100% fully compatible with each other. Thus, Singular & Redundant, Compact or Full-size I/O

modules can be mounted within a single, common HN800 I/O bus.

Optional mechanical keying can be implemented to prevent insertion of the wrong I/O module type.

Latching device on the base locks the base into position on DIN-Rail.

Industry standard 35-mm DIN rail, Horizontal row mounting.

Power Entry Circuit Breaker or Switch

The IPECB11 or IPECB13 Power Entry Circuit Breaker and IPESW11 or IPESW13 Power Entry

Switch terminate the AC or DC power input lines and provide line filtering before feeding power

to the power module chassis backplane. These devices mount on the back of the power fan chassis.

One circuit breaker or switch is used on N, N+1, and N+x redundant systems (Fig. 2); two are

used on 2N redundant systems (Fig. 3). The isolated inputs on 2N redundant systems allow for

mixed power inputs (i.e., 125 VDC and 120/240 VAC) because two separate power entry circuit

breakers or switches feed isolated power inputs to the power module chassis. 

Symphony Plus Control & I/O BRC410

ƒ Performance increase depends on specific

function blocks used, but in general

performance of latest module (BRC410)

compared with older modules:

ƒ ~ 10x vs. MFP01/02/11/12

ƒ ~ 4x vs. BRC100/200

ƒ Enhanced On-Line Configuration provided

by BRC410

ƒ BRC410 also provides ModBus TCP

ƒ BRC410 support 30,000 block addresses

and 4,000 Modbus TCP/IP points

ƒ Infi90 Modulebus support*

ƒ Downloadable firmware