ABB IEFAN01 Fan Assembly 120 VAC Six Fans

Fan Assembly 120 VAC Six Fans Manufacturers ABB, Bailey Model(s)

ABB Bailey Infi 90, ABB Bailey Infi 90 and Net 90

Additional Information IEFAN01 Fan Assembly, 120 VAC Six Fan Assembly

Estimated Shipping Size Dimensions: 19.0" x 2.0" x 14.0" (48.3 cm x 5.1 cm x 35.6 cm)

Weight: 18 lbs 0.0 oz (8.2kg )

Tariff Code: 8537109070

Country of Origin: United States Ships from Webster NY, USA

Fan Assembly 120 VAC Six Fans

Features and benefits

Termination for up to eight (8) analog I/O process signals within a horizontal row.

All SD I/O modules & bases of all types (Singular or Redundant) AND (Compact or Full-size), are

100% fully compatible with each other. Thus, Singular & Redundant, Compact or Full-size I/O

modules can be mounted within a single, common HN800 I/O bus.

Optional mechanical keying can be implemented to prevent insertion of the wrong I/O module type.

Latching device on the base locks the base into position on DIN-Rail.

Industry standard 35-mm DIN rail, Horizontal row mounting.

FEATURE

• Low-impedance busbar protection 

• Stub and T-zone protection 

• High functional reliability due to two independent measurement criteria: 

- stabilized differential current algorithm 

- directional current comparison algorithm 

• Phase-by-phase measurement 

• Reduced CT performance requirements 

• High through-fault stability even in case of  CT saturation 

• Full solid-state busbar replica 

• No switching of CT circuits 

• Only one hardware version for  

- 1 and 5 A rated currents 

- all auxiliary supply voltages between  48 V DC and 250 V DC 

- nominal frequencies of 50, 60 and  16.7 Hz 

• Short tripping times independent of the  plant’s size or configuration 

• Centralized layout: Installation of hardware  in one or several cubicles 

• Distributed layout: Bay units distributed  and, in the case of location close to the  feeders, with short connections to CTs, isolators, circuit breakers, etc. 

• Connections between bay units and central  unit by fiber-optic cables 

- maximum permissible length 1200 m  

- for distributed and centralized layout 

• fiber-optic connections mean interference proof data transfer even close to HV power  cables 

• Replacement of existing busbar protection  schemes can be accomplished without restrictions

(centralized layout) in the case of  substation extensions e.g. by a mixture of  centralized and distributed layout 

• Easily extensible

You may need the following additional products：

ABB HIEE405227R0001 UNS 0864 B-PV1 diode monitoring

ABB HIEE405167R0001 UNS 0865 A-PV1 Power System Stabilizer

ABB HIEE405246R0001 UNS 0867 A-PV1 I/O extension card without analog signal

ABB HIEE405246R0002 UNS 0867 A-PV2 I/O extension card with analog signal

ABB 3BHE01 3940R0001 UNS 0868 B-PV1 power supply

ABB 3BHE01 3940R0002 UNS 0868 B-PV2 power supply

ABB 3BHB001337R0002 UNS 0869 A-PV2 Power System Stabilizer

ABB 3BHB002651R0001 UNS 0874 A-PV1 Control Panel

ABB 3BHE004059R0104 SDCS-CON 2-21 Motherboard

ABB 3ADT315100R1012 SDCS-POW 4 internal power supply

ABB 3BHE006422R0001 UNS2861 C-P, V1 HGC door control unit

ABB 3BHE035495R0028 UNS 0017 A-PV1 RF board

ABB HIEE205010R0003 UNS 3020A-Z,V3 protection relay

ABB 3BHB0O1 336R0001 UNS 1860 B-PV1 interface

ABB HIEE305084R0001 UNS 0861 A-PV1 power supply

ABB HIEE305084R0002 UNS 0861 A-PV2 power supply

ABB HIEE405179R0001 UNS 0862 A-PV1 Analog input/output