GE IC693ACC341 Redundant Power Supply Base

The IC693 Redundant Power Supply System consists of a Baseplate and an Adapter, described below.

Redundant Power Supply (RPS) Baseplate The Redundant Power Supply Baseplate

has slots for two standard IC693 power supplies, an attached adapter

connection cable that connects to the Power Supply

Adapter, status LED lights, a 24VDC user output, and status relay outputs. 

There are two models of RPS

Baseplates, which are identical except for the length of the adapter connection cable. 

The IC693ACC340 has a 0.125-meter cable, and the IC693ACC341 has a 0.6-meter cable.

Redundant Power Supply Adapter The Redundant Power Supply Adapter plugs into a

standard IC693 PLC baseplate’s power supply slot. 

It has a connector that mates to the RPS Baseplate’s adapter connection cable. 

It also contains the backup battery and serial port connector for the PLC (backup battery and

serial port connector are not functional on the individual power supplies).

Auxiliary I/O Wiring and Functional Descriptions

The Auxiliary I/O connector includes a number of diverse signals used to interface the S2K

controller to your motion controller and machine. The functions available include:

• Analog Command Input (AI1)

• Torque Limit Analog Input (AI2)

• Analog Output (AO)

• +5 Vdc Output (for auxiliary encoder) (on the Pulse Input on SSI216. SSI228. & SSI420 models)

• +12 Vdc Output (for Enable input)

• Enable Input

• OK Output

• Encoder Output

• Auxiliary Encoder Input (on the Pulse Input on SSI216. SSI228. & SSI420 models)

The SSI216. SSI228. & SSI420 models have a different configuration for the Discrete I/O

and Auxiliary I/O connections as shown on the connection diagrams in Section 3.6.10.

The Enable input and OK output may be wired for either sinking or sourcing operation. The

operational voltage range is 12 to 24 volts DC. The OK output can sink or source 100 mA

maximum. The wiring to the Auxiliary I/O connector should be of appropriate size and

insulation quality for the application. To meet the requirements of EN61000-4-5 and CE

mark, Auxiliary I/O cables shall be shielded and shall not exceed 30 meters in length.

The IC693ACC336 is an auxiliary terminal board that is part of the Series 90-30 

Programmable Logic Controller (PLC) platform, formerly manufactured by GE Fanuc,

now under Emerson Automation. This module has 36 pin connectors that is used with the DSM302 and DSM314 module. 

This terminal is used with analog servos, providing screw terminals for wiring to 

a third-party servo amplifier and I/O components providing screw terminals for wiring of external 

components such as Strobe sensors, home switches, and Overtravel Limit switches. 

The IC693ACC336’s terminal16-18 and 34-36 are designed to be applied with a 

maximum voltage of 30 VDC while remaining input terminals are rated 5 VDC compatible with 14-18 Wire gauge.

We have the same series of models in stock. 

If you don't find the model you need, please contact us and we will provide you with an official quotation！

GE IC800SSI107D2-CE S2K Series Standalone Motion Controller

GE IC800SSI107P2- CE VersaMotion S2K controller

GE IC800SSD107RS1-CC VersaMotion S2K controller

GE IC800SSI107RS1-CE S2K Series Standalone Motion Controller

GE IC800SSI107RD2-CE VersaMotion S2K controller

GE IC800SSI107RP2-CE VersaMotion S2K controller

GE IC800SSI104RP2-CE VersaMotion S2K controller

GE IC800SSD228S1-CC VersaMotion S2K controller

GE IC800SSI228D2-CE VersaMotion S2K controller

GE IC800SSI228P2-CE VersaMotion S2K controller

GE IC800SSD228RS1-CC VersaMotion S2K controller

GE IC800SSD107S1-CC VersaMotion S2K controller

GE IC800SSI107S1-CE S2K Series Standalone Motion Controller