Part Number DS3800DGTA Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800DGTA is a printed circuit board under Mark IV series GE. The GE Gas Turbine Board DS3800DGTA is made to fit into the drive quickly. Each corner of the board has a hole. Screws can be used to secure the board in the drive. This GE Gas Turbine Board also has a single 20-pin ribbon cable linked to it.
There are 5 trimmer resistors and 6 wire connections on the PCB. There are also test points on this GE Gas Turbine Board. The GE Gas Turbine Board has its own slot in the board rack. The ribbon cable is positioned in such a way that it can easily fit into a connection on another board. To reach the connector, the ribbon cable must not be pulled or tugged. This is due to the fact that the control signals are carried by several tiny wires in the ribbon cable.
The connection that connects the ribbon cable to the connector that connects the ribbon cable to the connector that connects the ribbon cable to the connector. If the ribbon cable is tugged, the connections may be damaged or lost. Make sure there is enough slack for the ribbon cable to attach comfortably to the other board.
User name | Member Level | Quantity | Specification | Purchase Date |
---|
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved