Advantest D3186 Pulse Pattern Generator, 150 Mbps to 12 Gbps

The Q7750 optocope (optical network analyzer) is a revolutionary device for measuring optical transmission characteristics.

It can measure the amplitude/dispersion/group delay characteristics of incident and reflected light 

from optical devices at high speed and high resolution over the optical carrier frequency range.

In addition, it can easily measure various chromatic dispersion characteristics, including the zero-dispersion

characteristics and dispersion slope characteristics of dispersion-shifted or non-zero-dispersion fibers.

Measurement using the phase-shift method enables high optical frequency resolution and wide dynamic range.

Batch Measurement of Optical Transmission Characteristics in the Optical Carrier Frequency Range

Average power

Digital mobile communication systems use modulation patterns that can handle signals with large amplitude variations.

Therefore, we have included an average power calculation function that allows power measurement of signals with amplitude variations.

Total Power

For spread spectrum signals used in CDMA or wireless LANs, the total power measurement function is essential. 

This function consists of two modes: a channel mode for measuring the in-band power specified in the measurement window,

and a total power mode for measuring the total power over the entire measurement span.

The Single Scalable Test Platform

In the age of IoT, 5G and artificial intelligence, more than half of all the microchips 

manufactured in the world are tested by our equipment. 

As the industry's leading manufacturer of automated test systems for semiconductor devices, 

we continuously revolutionize market standards and enable customers to shape their digital future.

Our V93000 platform addresses the latest industry challenges and enables applications like 

Artificial Intelligence (AI) & High-Performance Compute (HPC), medical devices, 

Advanced Driver Assistance Systems (ADAS), making the world safer, faster and our lives easier.

Thanks to the platform's scalability and compatibility over multiple generations, V93000 is future proof and saves cost. 

The all-in-one platform covers a variety of different solutions like RF, digital, power and analog.

The Q7750 is equipped with a variable wavelength light source.

The Q7750 is equipped with a variable wavelength light source that enables simultaneous measurement of transmission 

and reflection characteristics in the optical carrier frequency range by scanning a series of wavelengths (optical frequencies) (S21 and S11 as S-parameters).

The measurement parameters are shown in the table below. These parameters can be measured simultaneously in a single scan.

Outstanding signal purity

The U3661's local oscillator is equipped with a precision synthesizer that achieves a signal purity 

of -100 dBc/Hz (at frequencies ≤3.2 GHz and an offset frequency of 10 kHz). 

It meets a variety of needs, from adjacent channel leakage power measurements at radio facilities to microwave equipment evaluation.

Recommended Products P/N：