Beckhoff CX7293 | Embedded PC with Arm® Cortex®-A9, PROFINET RT device and integrated I/Os

The CX7293 Embedded PC has an Arm® Cortex®-A9 single-core processor with

720 MHz. In the basic configuration, the CX7293 has a slot for a microSD card and

an Ethernet interface. As a special feature, the CX7000 series has eight integrated

multi-functional inputs as well as four integrated multi-functional outputs.

E-bus or K-bus terminals can be attached as required; the CX7293 automatically 

recognizes the type of I/O system connected during the start-up phase.

The control system is programmed with TwinCAT 3 via the Ethernet interface.

The CX7293 has a PROFINET RT device interface.

The CX7291 Embedded PC has an Arm® Cortex®-A9 single-core processor

with 720 MHz. In the basic configuration, the CX7291 has a slot for a microSD

card and an Ethernet interface. As a special feature, the CX7000 series has

eight integrated multi-functional inputs as well as four integrated multi-functional

outputs.

E-bus or K-bus terminals can be attached as required; the CX7291 automatically

recognizes the type of I/O system connected during the start-up phase.

The control system is programmed with TwinCAT 3 via the Ethernet interface.

BACnet (Building Automation Control Network) is a standardized, manufacturer

-independent communication protocol for building automation.

Areas of application include HVAC, lighting control, safety and fire alarm technology.

The CX7051 Embedded PC has an Arm® Cortex®-M7 single-core processor

with 480 MHz. In the basic configuration, the CX7051 has a slot for a microSD

card and an Ethernet interface. As a special feature, the CX7000 series has

eight integrated multi-functional inputs as well as four integrated multi-functional

outputs. The CX7051 has a CANopen responder (slave) interface.

E-bus or K-bus terminals can be attached as required; the CX7051 automatically

recognizes the type of I/O system connected during the start-up phase. 

The control system is programmed with TwinCAT 3 via the Ethernet interface.

The EK1101-0080 EtherCAT Coupler is the link between the EtherCAT protocol

at fieldbus level and the EtherCAT Terminals. The coupler converts the passing

telegrams from Ethernet 100BASE-TX to E-bus signal representation.

A station consists of a coupler and any number of EtherCAT Terminals that are

automatically detected and individually displayed in the process image.

Special features:

• Connection technology: 2 x RJ45 socket

• Connection lengths: up to 100 m

• Fast Hot Connect technology for changing topologies

• Number of EtherCAT Terminals in the overall system: up to 65.535

The EK1101-0080 supports Fast Hot Connect technology. This facilitates

significantly faster connection of the EtherCAT components in applications

with changing topologies. Compared to Hot Connect, which is an EtherCAT

feature and enables direct coupling and uncoupling of components during

system operation, Fast Hot Connect offers even faster data transfer and

allows even faster tool changes.

Beckhoff Cx5130-0120/4GB Embedded-PC with Intel-Atom-Processor Cx5130-0120

Beckhoff AX5201-0000-0202 server Driver#

CU8815-BECKHOFF-CU8815

Beckhoff CX2030 Industrial PC 4GB | HW: 4.2 | CX2030-0155

Beckhoff CP6933-0001-0000

BECKHOFF module EL5122

Beckhoff CP7711-0001-0030 Industrial Computer Detection

BECKHOFF AX5106-0000-0200 Servo Driver

FOR Beckhoff EK9500 EtherNet/IP-Buskoppler

Beckhoff CP3918-1012-0000 Multi-Touch Control Panel 24VDC

Beckhoff CP6207-0001-0020 1.6 GHz

Beckhoff C6650-0020 industrial PC

BECKHOFF C6920-0000 MODULE