Honeywell CC-PCNT01 Processor Module

• Estimated Lead Time : 1 - 10 Working days.

• Manufacturer : Honeywell

• Product No. : CC-PCNT01

• Product type : C300 Controller Module

• A distributed process controller and I/O gateway for the Experion system.

• Module contains printed circuit assemblies, status indicators and a display, inside in a plastic housing.

• Module mounts to its Input Output Termination Assembly (IOTA).

• Supply Rating: 0.311A @ 24VDC

• Shipping Weight : 2 Kg

Function 

The Analog Output (AO) Module delivers high-level constant current to actuators and recording/indicating devices.

Notable Features 

• Extensive self-diagnostics 

• Optional redundancy 

• Safe-state (FAILOPT) behaviors configurable on a per channel basis

• Output read-back and alarm on discrepancy

• Non-incendive output

variables 

• Safe-state (FAILOPT) behaviors configurable on a 

per channel basis 

• Output read-back and alarm on discrepancy 

• Non-incendive output 

FAILOPT 

Series C AO module supports the FAILOPT parameter on a per channel basis. The user can configure each channel to 

either HOLD LAST VALUE, or SHED to a SAFE VALUE. The Output will always go to zero, the safe state, if the IOM 

device electronics fails. 

 Series CIOTAsize is 6 inches.

 1. Selectdesiredmountinglocation on carrier andalign mountingholes in IOTAwith screw hole

 locations on the carrier. See the following dimension drawing for details.

 2. Besure componentside ofIOTAisfacingup. Secure IOTAto carrier usingscrews,

 washers andspacers provided.

 Insertspacers andwashers between bottomofIOTAandtopofcarrier.

 Onlytighten mountingscrews halfway.

 3. Tighten the screwsin terminals 24 Vdc+ andCOM(logicground)to the verticalbus bar to

 connect the cabinet resident 24 Vdcpower supply to the IOTA.

 4. Fully tighten the mountingscrews.

 5. RepeatSteps1 to4 tomountthe secondCF9 IOTAimmediatelybelow the one thatwasjust  installed.

 6. Thiscompletes the procedure. Go to WiringIOTAfor connection details

Series 8 I/O Overview 

This document provides technical information to configure the Series 8 I/O. 

The following Series 8 I/O items are included in this document. 

• TC/RTD 

• Analog Input – Single Ended 

• Analog Input with HART – Single Ended 

• Analog Input with HART – Differential 

• Analog Output 

• Analog Output with HART 

• Digital Input Sequence of Events (SOE) 

• Digital Input, 24 VDC 

• Digital Input Pulse Accumulation 

• Digital Output, 24 VDC 

• DO Relay Extension Board

Analogue Output Module

An optional Analogue Output Module, (Part Number 05701-A-0285),

may be factory fitted to the Single Channel Control Card and is used on a channel of gas detection to provide an isolated current loop output which follows the sensor signal level. 

This may be set electronically to produce a 0 - 20mA output or a 4 - 20mA output and can be used to operate a chart recorder, etc.

Related Items we have in stock

Standard FTA Components

MU-TAIH02 High Level Analog Input/STI with compression terminals

MU-TAIH03 High Level Analog Input/STI with compression terminals

MU-TAIH12 High Level Analog Input/STI with compression terminals

MU-TAIH13 High Level Analog Input/STI with compression terminals

MU-TAIH22 High Level Analog Input/STI with compression terminals

MU-TAIH23 High Level Analog Input with compression terminals

MU-TAIH52 High Level Analog Input/STI with screw terminals

MU-TAIH53 High Level Analog Input/STI with screw terminals

MU-TAIH62 High Level Analog Input/STI with screw terminals

MU-TAIL02 Low Level Analog Input with compression terminals

MU-TAIL03 Low Level Analog Input with compression terminals

MU-TAMR02 LLMux Analog Input RTD with compression terminals

MU-TAMR03 LLMux Analog Input RTD with compression terminals

MU-TAMT02 LLMux Analog Input TC with compression terminals

MU-TAMT03 LLMux Analog Input TC with compression terminals

MU-TAMT12 LLMux Analog Input TC with remote CJR, compress terminals

MU-TAMT13 LLMux Analog Input TC with remote CJR, compress terminals

MU-TAOX02 Analog Output with compression terminals

MU-TAOX12 Analog Output with compression terminals

MU-TAOX52 Analog Output with screw terminals