GE 8104-AO-IP 8-channel AO, 4-20mA

Peer to peer communication

SafetyNet Controllers can communicate with one another via Ethernet using SafetyNet

P2P - which has been certified as suitable for use in SIL 2 applications. Robust checks and

controls on access and data corruption ensure the safety of communication and

allow safety functions for which the inputs and outputs are widely separated to be

easily implemented - both in terms of the software programming and in the hardware design.

PAC8000 Controllers are used in conventional distributed control architectures, with the I/O modules connected directly to the Controllers. 

The same I/O modules may be used in remote IO architectures.

Benefits of PAC8000 Controllers

• Controller Options PAC8000 Controllers include a Process Controller featuring DCS style function block programming, 

a Logic Controller with 61131-style PLC programming, and a Hybrid Controller that provides the capabilities of both. 

An RTU Controller is also available, providing DNP3 communication. 

The SIL 2 SafetyNet Controller is also part of the PAC8000 family.

• I/O Modules A broad range of PAC8000 I/O modules are available to meet the needs of different applications.

All modules provide comprehensive diagnostic information. 

Analog and discrete output modules are typically 8-channel, with 8-, 16- or 32-channel discrete input modules. 

Up to 64 modules can be mounted on each node.

• Environmental and Hazardous Area Operation PAC8000 can go where other products cannot.

They can be field mounted and will operate under the following conditions: 

• -40°C to +70°C operating range

• ISA Level G3 corrosive atmospheres • 30g shock and 5g vibration

• Class I, Division 2 and Zone 2 hazardous areas, with I/O field wiring including intrinsically safe (Exi) and increased safety (Exe) options.

Features

• PAC8000 I/O is a completely modular I/O solution for both general purpose and hazardous area applications. It offers a wide variety of I/O functions, and has an open architecture that allows communication with a variety of different field-buses by selecting the appropriate type of Bus Interface Module (BIM) or Controller.

• Field terminals (one per I/O module) snap onto the carrier and accept field wiring without the need for additional terminals or connections. They can be changed easily if damaged in the field. A comprehensive mechanical keying system ensures that equipment safety is maintained.

• Carriers form PAC8000s physical and electrical backbone by providing a mounting onto a flat panel or T- or G-section DIN rail. They support and interconnect the BIM or Controller, power supplies, I/O modules and field terminals, and carry the address, data and power lines of the internal Railbus

• Returns commoned internally

• Pulse counting option

• 24 V dc bussed field power required

Open communications

MTL Open System Technologies products are just that - open. SafetyNet nodes

communicate with one another, with standard MOST nodes, historian and asset

management packages and with HMI packages over a fault tolerant Ethernet LAN,

running at up to 100 Mbit/s.

PAC8000 delivers full-specification performance in a broad range of harsh process environment conditions; extreme

temperatures, humidity or corrosives and conditions subject to shock and vibration. 

In ATEX environments, PAC8000 also excels. 

All components can be installed and maintained in Zone 2/Division 2 hazardous areas. 

The I/O includes modules that can be connected directly to Intrinsically Safe (Exi) or Increased Safety (Exe) field wiring. 

PAC8000 provides comprehensive diagnostic data on controllers, Bus Interface Modules (BIM), 

I/O modules, field wiring and field instruments, allowing users to respond to issues quickly and effectively.

GE 8810-HI-TX 8-Channel Safety AI, 4-20mA with HART

GE 8117-DO-DC 8-channel DO, 2-60Vdc isolated, unpowered

GE 8811-IO-DC 8-Channel Safety DI/DO, 24VDC, module-powered

GE 8118-DO-AC 8-channel DO, 20-250Vac isolated, unpowered

GE 8201-HI-IS 8-channel Intrinsically Safe Analog Input, 4-20mA with Hart

GE 8204-AO-IS 8-channel Intrinsically Safe Analog Output, 4-20 mA

GE 8220-DI-IS 16-channel Intrinsically Safe Digital Input, switch/promixmity detector

GE 8205-TI-IS 8-channel Intrinsically Safe THC/mV input

GE 8601-FT-NI Field terminal, non-incendive (Div 2)

GE 8617-FT-NI Field Terminal, non-incendive, for 16 ch DI

GE 8602-FT-ST Field terminal, standard

GE 8618-FT-MT 16-pin Mass Termination Assembly (Div 2)

GE 8603-FT-FU Field terminal, non-incendive, fused (Div 2)

GE 8619-FT-MT 44-pin Mass Termination Assembly (Div 2)

GE 8604-FT-FU Field terminal, fused

GE 8620-FT-MT Field terminal assembly

GE 8605-FT-TC Field terminal, thermocouple

GE 8621-FT-IS Intrinsically Safe Field terminal, standard

GE 8606-FT-RT Field terminal, RTD

GE 8622-FT-IS Intrinsically Safe Field terminal, loop-disconnect (not for 8 channel DI)

GE 8607-FT-TC Field terminal, 8-channel with T/C

GE 8623-FT-IS Intrinsically Safe Field terminal for 8220-DI-IS

GE 8608-FT-NI Field terminal, 8-channel, non-incendive

GE 8624-FT-IS Intrinsically Safe Field terminal with loop-disconnect

GE 8610-FT-NA Field terminal, non-arcing (Div 2)

GE 8625-FT-I SIntrinsically Safe Field terminal, THC

GE 8611-FT-FU Field terminal, non-arcing, fused (Div 2)

GE 8626-FT-IS Intrinsically Safe Field terminal, RTD

GE 8612-FT-NA 16-channel Field terminal, non-arcing

GE 8720-CA-04 4 module Intrinsically Safe carrier

GE 8710-CA-04 4 module carrier

GE 8723-CA-RB Railbus isolator carrier

GE 8711-CA-NS Node services carrier, screw terminal LAN

GE 8709-CA-08 I/O Carrier, 8 module with earth bar

GE 8717-CA-PS Carrier for 8910-PS-DC