Emerson Ovation 1X00781H01L Din-rail Power Supply Module

Introduction

DeltaV™ Electronic Marshalling delivers a new level of 

control system I/O performance with unprecedented flexibility 

and ease of use. The CHARM I/O card (CIOC) supports up 

to 96 individually configurable channels and is designed 

specifically for multi-core home run cables in centrally located 

marshalling cabinets. It can also be installed in field junction 

boxes to further reduce system design and installation costs. 

All communications are completely redundant from the 

channel (CHARM) to the DeltaV controller.

Benefits

I/O anywhere you need it: DeltaV CIOC provides an 

unprecedented flexibility in control system I/O topology. 

Using standard Ethernet infrastructure hardware you can add 

I/O anywhere you need it. From a local I/O cabinet to remote 

enclosures miles away, simply install the hardware and connect 

it to the DeltaV control network. Each I/O card can serve 

I/O signals to any four controllers in the system with 50-ms 

updates for fast, reliable control.

Specifications

DST Limit 1500

SCADA Tags 3200

Max Data Values Sent 4000/second

Max Data Values Received 500/second

Max Unsolicited Client Nodes 120

Module Execution Rates 100ms, 200ms, 500ms, 1s, 2s, 5s, 10s, 30s, 60s

User Memory 96 MB

Fuse Protection (Internal) 3.0 A, non-replaceable fuses

Power Dissipation 5.0 W typical, 7.0 W maximum

Operating Temperature -40 to 60 °C (-40 to 140 °F)

Storage Temperature -40 to 85 °C (-40 to 185 °F)

Reltive Humidity 5 to 95% , non-condensing

Shock 10 g½-sine wave for 11 ms

Vibration 1mm Peak-to-Peak from 2 to 13.2 Hz, 0.7g from 13.2 to 150 Hz

PK Flex Controller

The DeltaV PK Flex Controller builds upon the ground breaking innovation and technology of the PK Controller.

It provides the same powerful functionality but with the added advantage of flexible capacity and a subscription

based license that will help reduce capital costs.

The DeltaV PK Flex Controller is configured like any other controller in a DeltaV system and can be installed as simplex

or redundant node. It can be used for applications in a wide variety of sizes, from 50 to 1500 Flex DSTs, depending on

which capacity customers subscribe to. For Ethernet-APL Device Control, 

the DeltaV PK Flex Controller can be used for a variety of Ethernet-APL Devices, supporting Modbus

TCP client or EtherNet/ IP interface in port P01 and PROFINET(PN1). 

P01 and PROFINET (PN1) can be enabled at the same time for greater functionality

Recommended Products P/N：