Emerson Ovation 1X00046H02 Copper to Fiber Media Converter

Product Description

FOUNDATION™ fieldbus I/O is a modular subsystem that communicates digitally with field devices, 

increases your input/output capacity, and gives you access to more information about your process than conventional I/O subsystems. 

It greatly enhances device diagnostics that affect your control strategy and alerts operators to device malfunctions. 

If you want an efficient, economical, and secure process control system, use DeltaV™ FOUNDATION fieldbus I/O.

Maximize smart device capabilities. Increase your quality and throughput by taking advantage of the added diagnostics

of FOUNDATION Fieldbus I/O devices. Field device status is updated continuously using FOUNDATION Fieldbus I/O.

For multi-variable devices, all process variables are available on the single fieldbus at the cost of a single Device Signal Tag.

Redundant H1 cards provide increased availability.

The DeltaV system offers redundant H1 interfaces. The two H1

interfaces are connected with a redundant terminal block to

provide back-up link active schedule (LAS) capability that also

maintains communication with the host system. 

Transfer to the standby card is automatic and requires no special configuration.

Ongoing diagnostics ensure the standby H1 card is available on demand. 

This process requires no user interaction.

Two H1 interfaces can be mounted in adjacent slots using the 2-wide redundant terminal block. 

The DeltaV controller recognizes the presence of redundancy and presents both cards as a single pair within the system. 

There is no additional user configuration required to set up the redundant H1 hosts. 

Segment Power is provided using third party Ff power supplies that also provide segment physical layer diagnostics. 

The H1 interface segment wires connect to these power conditions while a separate segment trunk wire connects to the field devices

Our Business

Emerson’s industry-leading portfolio enables us to identify and confront the challenges of an 

increasingly complex and unpredictable marketplace from a position of strength, 

driving near- and long-term value as a trusted partner for our customers.

The FOUNDATION Fieldbus H1 interface is packaged in a small form factor enclosure and installs on any I/O slot of the S-series horizontal carriers. 

The interface uses a separate terminal block to which the segment wires are connected. 

A single interface is used with the 1 wide terminal block in a simplex installation. 

Recommended Products P/N：

Emerson Ovation 5X00105G10 Control Board

Emerson Ovation 5X00105G03 Control Board

Emerson Ovation 5X00105G01 Control Board

Emerson Ovation 1C31234G01 Contact Input Module

Emerson Ovation 1C31142G01 Contact Input

Emerson Ovation 5A22727G03 Consumables Kit

Emerson Ovation 1C31129G03 Analog Output Card

Emerson Ovation 5A22727G02 Consumables Kit

Emerson Ovation 4D33942G02 Chassis/Metalwork/Fan

Emerson Ovation 4D33942G01 Chassis/Metalwork/Fan

Emerson Ovation 1X00377H01 Cable Management Bar

Emerson Ovation 5A26141G05 Cable Controller to Transition Panel

Emerson Ovation 5A26137G04 Cable

Emerson Ovation 5X00111G01 Cabinet Power Distribution Kit

Emerson Ovation 3A99419G06 Cabinet Ground Cable

Emerson Ovation 3A99419G03 Cabinet Ground Cable

Emerson Ovation 1C31129G04 Analog Output w/o Diagnostics