A-B 1756-OC8 module Rockwell ControlLogix 8 digital output

Overview

• Offers certification to a robust control system security standard - TÜV Rheinland IEC 62443-4-2

• Gains up to 45% capacity when using the 5580 controller

• Includes a 1 gigabit (Gb) embedded Ethernet port that enables high-speed communications, I/O, and motion control

• Offers controller functions that maximize system performance

• Includes controller-based change detection and logging, digitally-signed controller firmware, and role-based access control for extra security

• Provides a display that allows for enhanced diagnostics and troubleshooting

• Offers conformal coating to help protect in harsh environments; these products include a “K” in the catalog number

• Offers memory options from 3…40 MB

• Includes a 1756 Slim Power Supply option for series B and C standard and 1756 XT Chassis, which offers a 29% reduction in width when space is limited

• Offers chassis with up to 17 slots in standard and conformal coated

  

GuardLogix 5580 Safety Controllers

• Achieves SIL CL 2 / PLd with primary controller

• Achieves SIL CL 3 / PLE with primary controller plus safety partner

• Optimized for faster safety reaction time to achieving protective device coverage and reducing the risk of injury

• Offers Standard memory options from 3...20 MB

• Offers safety memory options from 1.5...6 MB

• Offers communication options from 100...250 EtherNet/IP nodes

• Offers conformal coated options for harsh environments

• Provides single controller/software/network for standard and safety control

• Includes mix and match safety and standard I/O

• Provides networked safety functions with motion and the following drives: Kinetix® 5700 with Advanced Safety and PowerFlex® 755 with Advanced Safety

The 1747-BSN features:

• backup of one Remote I/O or DH+ network per complementary BSN module pair.

• backup of one RS-232/DH-485 communications per complentary BSN module pair,

• allowing HMIs on channel 0 to automatically transfer to the primary processor.

• transfer of up to 2 K words of retentive data per BSN.

• repair of primary system fault during secondary backup system operation.

• remote programming capability of secondary processor on DH+ (SLC 5/04 only).

• minimal user program impact.

• backup system diagnostic information.

Selecting a ControlLogix System

The ControlLogix system architecture provides sequential, process, and

motion control together with communications and state-of-the-art I/O in a

small, cost-competitive package. The system is modular, so you can design,

build, and modify it efficiently - with significant savings in training and engineering.

A ControlLogix system can be anything from a simple chassis to a highly-distributed

system consisting of multiple chassis and networks working together.

A simple ControlLogix system consists of a stand-alone controller and I/O modules in a single chassis.

Or you can use the ControlLogix system as a gateway. Include the

communication modules you need for connectivity to other networks. For

this use, a controller is not required. The ControlLogix Gateway integrates

into existing PLC-based systems so that users with existing networks can

send or receive messages to or from other networks.

For a more robust system, use:

• multiple controllers in a single chassis

• multiple controllers joined across networks

• I/O in multiple platforms that is distributed in many locations and

connected over multiple I/O links

Ethernet Network

The TCP/IP Ethernet network is a local-area network designed for the high-speed exchange of information 

between computers and related devices. With its high bandwidth (10 Mbps to 100 Mbps), 

an Ethernet network allows many computers, controllers, and other devices to communicate over vast distances. An Ethernet network

The 1747-BSN module contains the full complement of RIO scanner features, plus

backup capability for support of redundant processor applications. The backup system

consists of one or more pairs of complementary modules, with one module residing in the

primary system and the other in the backup system. The primary system controls the

operation of remote I/O, while the backup system monitors communications via the

high-speed serial link (HSSL) and is available to take control in the event of a fault in the primary system.

You may also need the following related products：

1756-OB32 module Rockwell ControlLogix 32 digital output

1756-OB8 module Rockwell ControlLogix 8 digital output

1756-OB8EI module Rockwell ControlLogix 8 digital output

1756-OB8I module Rockwell ControlLogix 8 digital output

1756-OC8 module Rockwell ControlLogix 8 digital output

1756-OF4 module Rockwell ControlLogix 4 analog

1756-OF6CI module Rockwell ControlLogix 6 analog

1756-OF6VI module Rockwell ControlLogix 6 analog

1756-OF8 module Rockwell ControlLogix 8 analog

1756-OF8H module Rockwell ControlLogix 8 analog

1756-PB72 Module Rockwell ControlLogix DC Power Supply

1756-PB75 Module Rockwell ControlLogix DC Power Supply

1756-PB75R Module Rockwell ControlLogix DC Power Supply

1756-PBR2 Module Rockwell ControlLogix Power Supply

1756-PBXT Module Rockwell ControlLogix XT Power Supply

1756-OG16 module Rockwell ControlLogix 16 digital output

1756-OH8I module Rockwell ControlLogix 8 digital output

1756-ON8 module Rockwell ControlLogix 8 digital output

1756-OV16E module Rockwell ControlLogix 16 digital output

1756-OV32E module Rockwell ControlLogix 32 digital output

1756-OW16I module Rockwell ControlLogix 16 digital output

1756-OX8I module Rockwell ControlLogix 8 digital output

1756-PA72 Module Rockwell ControlLogix AC Power Supply

1756-PA75 Module Rockwell ControlLogix AC Power Supply

1756-PA75R Module Rockwell ControlLogix AC Power Supply

1756-PAR2 Module Rockwell ControlLogix AC Power Supply

1756-PAXT Module Rockwell ControlLogix XT Power Supply