Emerson DeltaV Bulk Power Supply Redundancy Module,12-28V, 40A VE5135

Introduction

Power—your system won’t operate without it. 

DeltaV™ Bulk Power Supplies offer you the most efficient and reliable power solution for your money. 

The DeltaV Bulk Power supply suite provides power to the system electronics and to the field. 

This is all the power required for your DeltaV system.

Benefits

Easy to use. The DeltaV Bulk Power Supplies provide reliable 12 and 24 VDC power for your DeltaV system

power and bussed field power needs.

They mount easily onto a T-type DIN rail—easy!

Flexible and cost-effective. 

The Legacy DeltaV Bulk Power Supplies has built in load-sharing capabilities

enable you to add more power or provide power redundancy to your system while the new DeltaV Bulk

Power Supplies will use external redundancy Modules for this purpose which makes their footprint smaller.

Leveraging Digital Intelligence

The Ovation PlantWeb digital plant architecture begins with a strong foundation of intelligent field devices from industry leaders such as Fisher and Rosemount.

With their digital capabilities — including onboard microprocessors, embedded software, and openstandard communications — these field devices can…

• Deliver precise measurement and control to reduce process variability.

• Handle multiple variables to reduce the number of devices required.

• Perform diagnostics to monitor device health, predict problems, and avoid downtime.

Product Description

FOUNDATION™ fieldbus I/O is a modular subsystem that communicates digitally with field devices, 

increases your input/output capacity, and gives you access to more information about your process than conventional I/O subsystems. 

It greatly enhances device diagnostics that affect your control strategy and alerts operators to device malfunctions. 

If you want an efficient, economical, and secure process control system, use DeltaV™ FOUNDATION fieldbus I/O.

Maximize smart device capabilities. Increase your quality and throughput by taking advantage of the added diagnostics

of FOUNDATION Fieldbus I/O devices. Field device status is updated continuously using FOUNDATION Fieldbus I/O.

For multi-variable devices, all process variables are available on the single fieldbus at the cost of a single Device Signal Tag.

Redundant H1 cards provide increased availability.

The DeltaV system offers redundant H1 interfaces. The two H1

interfaces are connected with a redundant terminal block to

provide back-up link active schedule (LAS) capability that also

maintains communication with the host system. 

Transfer to the standby card is automatic and requires no special configuration.

Ongoing diagnostics ensure the standby H1 card is available on demand. 

This process requires no user interaction.

Benefits

Increase I/O capacity while reducing wiring.

Use FOUNDATION Fieldbus I/O instead of Classic I/O to increase the I/O density and quality of information of your

field devices. Take advantage of FOUNDATION Fieldbus digital communications to access additional information from your

smart devices. Get more information over one wire with up to 16 Ff devices per H1 segment, and 2 segments per card for up

to 32 devices per H1 card.

The S-series H1 with integrated power provides local LED indicators to assist in trouble shooting:

„ 2 Yellow LED’s: One per port Indicating the port is enabled and communicating with devices.

„ 2 Red LED’s: One per port indicating to health of power supply as well as monitoring voltage or short circuit faults on the physical layer.

„ Fault LED: Indicates internal fault with the H1 card.

„ Power LED: Indicates available LocalBus power.

The Fieldbus I/O Card meets ISA G3 corrosion specifications by using superior electronic components and conformal coating.

One of the most powerful features of FOUNDATION Fieldbus devices is their diagnostic data.

Using AMS Device Manager, you can access all of the necessary information to configure,commission, monitor, 

and troubleshoot all your FOUNDATION Fieldbus smart devices. Improved device diagnostics can lead to increased product quality and minimize unplanned downtime.

Improve the productivity and profitability of your process control system with FOUNDATION Fieldbus.

Recommended Products P/N：

EMERSON 24VDC System Power Supply SE5009

EMERSON S-series AS-i Interface Card

EMERSON S-series Actuator Sensor Interface Card, includes terminal block SE4009

EMERSON S-series 4-port Foundation™ Fieldbus I/O

EMERSON EtherNet/IP Interface for Ethernet connected I/O (EIOC) VE4105

EMERSON OPC-UA client for Ethernet connected I/O (EIOC) VE4106

EMERSON IEC 61850 MMS Interface for Ethernet connected I/O (EIOC) VE4107

EMERSON Ethernet connected I/O (EIOC and PK): nn Physical Devices VE4109Sxxx

EMERSON Ethernet I/O card KL2001X1-BD1

EMERSON Ethernet Isolation Port for Twisted Copper KL1604X1-BA1

EMERSON Dual Horizontal Carrier KL4104X1-BA1

EMERSON SE4019P0 Simplex H1 4-port Plus; Fieldbus I/O Interface with Terminalblock

EMERSON SE4039P0 Redundant H1 4-port Plus; Fieldbus I/O Interface with Terminalblock

EMERSON DeltaV SISTM Logic Solver 

EMERSON VS3202 DeltaV SLS 1508 Redundant Logic Solver

EMERSON DeltaV™ MX Controller VE3007

EMERSON DeltaV™ Wireless I/O Card SE4801T01 SE4801T02

EMERSON Ethernet I/O Card (EIOC)

EMERSON SE4100 Simplex Ethernet I/O Card (EIOC) Assembly

EMERSON SE4101 Redundant Ethernet I/O Card (EIOC) Assembly

EMERSON MODBUS TCP Interface for Ethernet connected I/O (EIOC) VE4103

EMERSON EtherNet/IP Control Tag Integration for Ethernet connected I/O (EIOC) VE4104

EMERSON DeltaV™ SX Controller SE3007

EMERSON VE3006 M-series MD Plus Controller MD-PLUS Controller