Johnson Controls M4-XPM18000-0 18-point Input Expansion Module

The CGM09090 and CGM04060 General Purpose

Application MS/TP Controllers (CGs) are equipment

controllers that run pre-engineered and user

programmable applications, and provide the inputs and

outputs required to monitor and control a wide variety of

HVAC and other facility equipment. CG series controllers

operate on an RS-485 BACnet® MS/TP Bus as BACnet

Advanced Application Controllers (B-AACs) and integrate

into Johnson Controls® and third-party BACnet systems.

CG series controllers include an integral real-time clock,

which enables the controllers to monitor and control

schedules, calendars, and trends, and operate for

extended periods as stand-alone controllers when offline

from the Facility Explorer® system network.

Communications Protocols

The CG series controllers can communicate using

BACnet MS/TP, N2. or wireless Zigbee®. By default,

these controllers communicate using the BACnet MS/

TP protocol. The BACnet protocol is a standard for ANSI,

ASHRAE, and the International Standards Organization

(ISO) for building controls.

The CG series controllers can be used as functional

replacements for legacy N2 controllers. The N2-capable

MS/TP equipment controller models provide a cost

effective upgrade and modernization path for customers

with existing N2 controllers. For installation and

commissioning support, and tips for efficient and safe

replacement, refer to the Modernization Guide for Legacy

N2 Controllers (LIT-12012005) and the controller-specific

documentation. For information about mapping N2

Objects in controllers with switchable communications

protocols, refer to the N2 Compatibility Options chapter of

the Controller Tool Help (LIT-12011147).

The CGM controllers ship with a default state that can

assist in validating the wiring of the input and output

terminals prior to download of an application file. 

Johnson Controls M4-XPM18000-0 18-point Input Expansion Module

Johnson Controls TL-CCT-0 License enabling Controller

Johnson Controls MS-FCP-0 License enabling Metasys Equipment Controller

Johnson Controls MS-DIS1710-0 Local Controller Display

Johnson Controls NS-ATV7003-0 Handheld VAV Balancing Tool

Johnson Controls NS Series Network Sensors 

Johnson Controls AS-CBLTSTAT-0 Cable adapter for connection to 8-pin TE-6700 Series sensors

Johnson Controls NS-WALLPLATE-0 Network Sensor Wall Plate

Johnson Controls WRZ Series Wireless Room Sensors 

Johnson Controls WRZ-7860-0 Refer to the WRZ-7860 Receiver

Johnson Controls WRZ-SST-120 Refer to the WRZ-SST-120 Wireless Sensing System