Beckhoff EL5151-0090 | EtherCAT Terminal, 1-channel encoder interface, incremental

The EL5151-0090 EtherCAT Terminal is an interface for the direct connection

of one incremental encoder (24 V HTL). An additional 24 V digital input is

available for storing or blockingthe counter status. As an alternative, the

EL5151-0090 can be used as a up/down counter.

The 24 V supply of the encoder can be provided directly via the terminal

connection points.

The EL5151-0090 also supports TwinSAFE SC (TwinSAFE Single Channel).

This enables standard signals to be used for safety-related tasks in any

network or fieldbus.

The ED5112 EtherCAT Terminal is an interface for the direct connection of

two incremental encoders with A and B tracks or one encoder with A, B,

and C tracks. Encoders with differential signals (RS422) or single-ended

signals (TTL and open collector) can be connected, and input frequencies

up to 5 MHz can be evaluated.

In 2-channel mode, one 24 V DC digital input is available per channel for

saving, locking, or setting the counter value. Both inputs can be used in

1-channel mode. Furthermore, the counter value can also be set directly

to a specified value via the process data, or the counter can be locked.

The encoders can be supplied with 5 V, 12 V, or 24 V DC directly via the

connection points of the terminal.

The EL5101-0011 EtherCAT Terminal is an interface for the direct connection

of incremental encoders with differential signals (RS422).

It processes the signals for a finer resolution of position values according to

the oversampling principle. The 5 V and 24 V supply of the encoder can be

provided directly via the terminal connection points.

The EL5101-0011 reads the current counter value at several configurable and

equidistant times between two fieldbus communication cycles with an

adjustable whole number multiple (oversampling factor: n) of the bus cycle

time. A packet of n position values of 32 bits each is then transmitted to the

higher-level controller in the next fieldbus communication cycle. The minimum

sampling time is 10 µs (100 ksps). The EL5101-0011 terminal is especially

suitable for applications where high-resolution position detection is required.

The EL5072 EtherCAT Terminal is used for the direct connection of up to

two inductive displacement sensors, which include measuring probes in

LVDT and half bridge versions or inductive angle position sensors in RVDT

version. The integrated excitation source provides a further area with

various excitation frequencies and voltages. By internal switching and

switchable input impedances, commercially available inductive sensors

such as LVDT in 4-, 5-, 6-wire technology to half-bridge in 3- and 5-wire

technology can be connected and evaluated.

All sensor parameters such as excitation frequency, excitation voltage,

measuring range and sensitivity are set directly in the terminal.

The measuring signal range is automatically adjusted; the measured

value is directly output as a 32-bit position value.

Inversion of the measuring signal and a reference position can be

parameterized via the process data. Furthermore, short circuit and overload

of the excitation source as well as amplitude errors of the measuring signal

are diagnosed per channel and displayed by signal LEDs.

One digital input is available per channel for setting and saving the current

position value; a timestamp can be generated for the stored value.

Precision measuring tasks in the area of position and distance measurement

with inductive measuring probes can be successfully solved in this way with

the EL5072.

Eaton XP-702-E0-84TSIJ-10 , Touchscreen Industrial Panel PC, 8.4" /24VDC

Eaton 9130 1KVA Marine Filter PN 1029424 Rev 002 220/230/240VAC 50/60Hz 1603

Cutler Hammer Network Interface CONI3 CONI-III W/DR IMPACC 8793C80G01

EATON HMCP400W5C MOTOR CIRCUIT PROTECTOR

EATON DURANT 57820-400 COUNTER 57820400 5782-0

EATON CORPORATION EVLSCX92101/MT / EVLSCX92101MT

EATON CORPORATION HKD3400F CIRCUIT BREAKER

EATON CORPORATION JDB3250W CIRCUIT BREAKER

EATON CORPORATION A200M2CX MOTOR STARTER

EATON 585-16 NSNP

LCD Monitor Kit for Cutler-Hammer/ Eaton Panelmate PowerPro 5785 with Cable Kit

EATON CUTLER HAMMER FP5000 5AMP CAT FP5000-00 STYLE NO 66D2041G01

Eaton 8937-HN Mtl Fiber Optic Extender 20V-30VDC 85MA-74MA Max

EATON CORPORATION 2CLE-400X FUSE

Eaton 1023843 Power Circuit Board 94V

EATON CUTLER HAMMER 1570 PM 1500 PanelMate POWER SERIES 24V P/N: 92-01756-06 REP

Eaton 5p1550ir Rack 9210-6384-00p 200-240V

EATON CAT. # mint Magnum Communication Module, Universal Frame, MODBUS

EATON MTDUVR230V TIME DELAY UNDERVOLTAGE MODULE

EATON MTDUVR230V TIME DELAY UNDERVOLTAGE MODULE

MIII EATON DYNAMATIC 15-283-3096 DRIVE CONTROLLER MARK111

8811-IO-DC-01 Brand New GE EMERSON MTL EATON 8 Channel Safety Discrete Input/Out

EATON CAT. mMINT Magnum Communication Module, Universal Frame, MODBUS

EATON XV-152-D6-10TVRC-10 RESISTIVE TOUCH, 10.4" TFT METAL 24VDC 0.6A PN:150611