MOOG D691-078D servo valve

The Moog Focal Model 914-X Series Modular Multiplexer System is a compact and rugged transmission system

designed for industrial environments and other applications that require transmission of HD video, serial data, and

Ethernet over an optical link. The 914-X Series has been optimized for low power operation and delivery of low

latency, uncompressed video and Ethernet data.

A series of expansion cards are available, allowing additional composite video channels, serial data channels,

Ethernet ports, as well as many specialty signals such as TTL, hydrophone, CAN bus, and custom sonars to be

added to any 914-X Series system without requiring extra fibers or wavelengths.

The rich feature set and vast signal options are packaged in an incredibly small form factor. The credit card size,

along with the geometry and location of connectors, allow the 914-X Series multiplexers to be installed in very small

enclosures. Multiple card systems can be configured either as stacks or via flexible high speed ribbon cable,

providing even further installation flexibility.

Optionally, the 914-EX can be configured for dual expansion mode, which uses two medium speed expansion

channels on the 914-HDE. This mode allows for a full 1000 Mb/s of bandwidth per Ethernet port and is ideal for

high bandwidth video over IP or GigE vision applications. Since the 914-HDE motherboard multiplexes the Ethernet

data from the 914-EX card and other expansion cards in the system, the total system bandwidth usage must be

considered, and be at (or under) the maximum optical bandwidth available for the system. Refer to Section 3.2 for

detailed information 914-X series card bandwidth usage.

The G122-824 P-I Servoamplifier is used in closed loop applications where

a proportional and/or integral amplifier is needed.