Power Engineering 
K-JIANG
NameDescriptionContent
  • Beckhoff EL1804 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 3 ms, 3-wire connection
  • Beckhoff EL1722 | EtherCAT Terminal, 2-channel digital input, 120…230 V AC, 10 ms, without power contacts
  • Beckhoff EL1712-0020 | EtherCAT Terminal, 2-channel digital input, 120 V DC, 3 ms
  • Beckhoff EL1712 | EtherCAT Terminal, 2-channel digital input, 120 V AC/DC, 10 ms
  • Beckhoff EL1702-0020 | EtherCAT Terminal, 2-channel digital input, 220 V DC, 3 ms
  • Beckhoff EL1804 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 3 ms, 3-wire connection
  • Beckhoff EL1512 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 1 kHz
  • Beckhoff EL1502 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 100 kHz
  • Beckhoff EL1262-0050 | EtherCAT Terminal, 2-channel digital input, 5 V DC, 1 µs, oversampling
  • Beckhoff EL1262-0010 | EtherCAT Terminal, 2-channel digital input + 2-channel digital output
  • Beckhoff EL1259 | EtherCAT Terminal, 8-channel digital input + 8-channel digital output, 24 V DC, 1 µs, 0.5 A, multi-timestamp
  • Beckhoff EL1258 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 1 µs, multi-timestamp
  • Beckhoff EL1252-0050 | EtherCAT Terminal, 2-channel digital input, 5 V DC, 1 µs, timestamp
  • Beckhoff EL1252-0010 | EtherCAT Terminal, 2-channel digital input, 24 V DC, 10 µs, timestamp
  • Beckhoff ELX1058 | EtherCAT Terminal, 8-channel digital input, NAMUR, Ex i
  • Beckhoff ELX1054 | EtherCAT Terminal, 4-channel digital input, NAMUR, Ex i
  • Beckhoff EK/EC1xxx, BK1xx0 | EtherCAT Couplers
  • Beckhoff BK1150 | EtherCAT Compact Bus Coupler
  • Beckhoff BK1120 | EtherCAT Bus Coupler for standard Bus Terminals
  • Beckhoff EK1960 | TwinSAFE Compact Controller
  • Beckhoff EK1914 | EtherCAT Coupler with integrated digital standard and safety I/Os
  • Beckhoff EK1828-0010 | EtherCAT Coupler with integrated digital outputs
  • Beckhoff EK1828 | EtherCAT Coupler with integrated digital inputs/outputs
  • Kollmorgen Stainless Steel AKMH Series
  • Kollmorgen AKME Series Servo Motors
  • Kollmorgen Essentials™ Servo Motors
  • Kollmorgen Essentials Motors Offer High Performance at an Exceptional Value
  • Kollmorgen Essentials Drive: Plug In. Power Up. Perform.
  • Kollmorgen The Benefits of the Essentials Servo System
  • Kollmorgen AKM2G represents the latest evolution of the industry-leading AKM motor family
  • Kollmorgen AKM® 2G Servo Motors
  • Kollmorgen New AKD2G 24A Drive
  • Kollmorgen Automation Suite™ Motion in Minutes
  • Kollmorgen 1G Motion System
  • Kollmorgen Essentials™ Motion Systems
  • Woodward Gas Stop/Ratio Valve
  • Beckhoff EK1818 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1814 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1541 | EtherCAT Coupler with ID switch, plastic optical fiber
  • Beckhoff EK1501-0100 | EtherCAT Coupler, media converter
  • Beckhoff EK1501-0010 | EtherCAT Coupler with ID switch, single-mode fiber optic
  • Beckhoff EK1501 | EtherCAT Coupler with ID switch, multi-mode fiber optic
  • Beckhoff EK1300 | EtherCAT P coupler
  • Beckhoff EK1122-0080 | 2-port EtherCAT junction, Fast Hot Connect
  • Beckhoff EK1122-0008 | 2-port EtherCAT junction with M8 connection
  • Beckhoff EK1121-0010 | 1-port EtherCAT junction, Extended Distance
  • Beckhoff EK1110-0043 | EtherCAT EJ coupler, CX and ELterminal connection
  • Beckhoff EK1110-0044 | EtherCAT EJ coupler, CX and EL terminal connection, EtherCAT junction
  • Beckhoff EK1110-0008 | EtherCAT extension with M8 connection
  • Beckhoff EC1110 | EtherCAT Terminal extension, RJ45, angled, push-in
  • Beckhoff CU8130-0240 | UPS modul, battery-backed
  • Beckhoff CU8130-0120 | UPS module, battery-backed
  • Beckhoff CU8110-0120 | UPS module, capacitive
  • Beckhoff CU8110-0060 | UPS module, capacitive
  • Beckhoff CX2072 | Embedded PC with Intel® Xeon® D-1567
  • Beckhoff CX2062 | Embedded PC with Intel® Xeon® D-1548
  • Beckhoff CX2042 | Embedded PC with Intel® Xeon® D-1527
  • Beckhoff CX2043 | Embedded PC with AMD Ryzen™ V1807B
  • Beckhoff CX2033 | Embedded PC with AMD Ryzen™ V1202B
  • Beckhoff CX20x3 | Embedded PC series
  • BAUMULLER b maXX 1000 Frequency converter
  • BAUMULLER b maXX 2400 Mini servo controller up to 2 kW
  • BAUMULLER b maXX 3300 Servo controller up to 5 kW
  • BAUMULLER b maXX 4600/4700 Peak and nominal load devices
  • BAUMULLER b maXX 4100 Regenerative power supply unit
  • BAUMULLER b maXX 4400 – The modular servo controller
  • BAUMULLER b maXX-drivePLC
  • BAUMULLER b maXX 4000 Modular servo controller
  • BAUMULLER b maXX 5600/5700 The application specific servo drive
  • BAUMULLER b maXX 5000 The safe, modular servo controller
  • Kollmorgen EtherCAT® Bus Coupler Features
  • LENZE i950 cabinet servo inverter
  • LENZE i750 cabinet servo inverter
  • LENZE i700 cabinet servo inverter
  • LENZE i650 motec frequency inverter
  • LENZE i550 motec frequency inverter
  • LENZE i550 protec frequency inverter
  • LENZE x500 IoT gateway
  • Beckhoff CX5630 | Embedded PC with AMD Ryzen™ R1505G
  • Beckhoff CX5620 | Embedded PC with AMD Ryzen™ R1102G
  • Beckhoff CX56x0 | Embedded PC series
  • Beckhoff CX5340 | Embedded PC withIntel Atom® x6425RE
  • Beckhoff CX53x0 | Embedded PC series
  • Beckhoff CX2500-M510 | Fieldbus master module CANopen for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-M310 | Fieldbus master module PROFIBUS for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-B510 | Fieldbus slave module CANopen for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-B310 | Fieldbus slave module PROFIBUS for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX52x0 | Embedded PC series
  • Beckhoff CX5140 | Embedded PC with Intel Atom® E3845
  • Beckhoff CX9240 | Embedded PC with Arm® Cortex®-A53
  • Beckhoff CX9020 | Embedded PC with Arm® Cortex®-A8
  • Beckhoff CX8290 | Embedded PC with Arm® Cortex®-A53 and 2-port Ethernet switch
  • Beckhoff CX8280 | Embedded PC with Arm® Cortex®-A53 and RS232/RS485
  • Beckhoff CX8210 | Embedded PC with Arm® Cortex®-A53 and EtherCAT slave
  • Beckhoff CX82xx | Embedded PC series, compact PLC
  • Beckhoff CX8191 | Embedded PC with Arm® Cortex®-A9 and BACnet/IP
  • Beckhoff CX7000 | Embedded PC with Arm® Cortex®-M7 and integrated I/Os
  • LENZE I/O system 1000
  • Schneider SAITEL Remote Terminal Unit & Controller
  • Schneider Saitel DP platform M586A0000y / SM_DO16R
  • LENZE C250-S Safety Controller
  • LENZE c520/c550/c750 controllers Powerful – everything under control
  • LENZE C550 Controller
  • LENZE C520 Controller
  • LENZE C430 Controller
Current Location:

E-mail

Password

Register Forgot password?
KEBA AR281 Industrial Control Module
❤ Add to collection

KEBA AR281 Industrial Control Module

+86-18144100983
kongjiangauto@163.com
wind, petroleum, chemical, natural gas, Marine, mining, aviation, electronics, steel, nuclear power, electric power, coking, air separation and so on
PLC, DCS, servo, analog, Ethernet, digital, redundant module, tension system, excitation, generator management, human-machine interface, detection card, sensor, AC drive, etc
U.S.$8537.00
U.S.$4346.00
Weight:3.300KG
Quantity:
(Inventory: 3)
Buy now
Add to cart
Product parameters
  • Tell:+86-18144100983
  • email:kongjiangauto@163.com
  • Application:wind/ petroleum/ chemical/ natural gas/ Marine/ mining/ aviation/ electronics/ steel/ nuclear power/ electric power/ coking/ air separation and so on
  • Series:PLC/ DCS/ servo/ analog/ Ethernet/ digital/ redundant module/ tension system/ excitation/ generator management/ human-machine interface/ detection card/ sensor/ AC drive/ etc
Feature

The BL 210/B (CANopen) and the BL 27x/x series are bus coupler modules that,

in combination with I/O modules,

enable the decentralization and transmission from module islands.

The BL 27x/x series is used as a bus coupler between EtherCAT and K-bus.

Modules of the system can thereby be ope

rated as remote I/O islands. The BL 27x/x can be connected to a control via

EtherCAT and is thereby made an EtherCAT

slave. Two variants of the BL27x series are available:- With four additional

digital inputs (BL 27x/A)- With four additional digital outputs (BL 27x/B)

As a special feature, the BL 272/x enables the connection of interface modules

for fieldbuses (FM 200/A) and serial in terfaces (SM 210/A, SM 220/A, SM 230/A).

This enables the operation of such interfaces remotely from CPU modules.

This feature is also referred to as “bus via bus communication”.

The status of the module is indicated via a status LED. The LEDs on the RJ45

sockets provide information about the link and activity status of the respective

network connection. Each digital input/output also has a status display (active/ not active).

These modules are attached directly to a CPU module or can be operated with

all KEBA controls by means of bus couplers.

SM 210/A and SM 230/A are serial interface modules and enable the connection

of two RS 232-C or RS 422/485-A serial interfaces. The two communication channels

function independent of one another in full-duplex operation.

SM 220/A is a serial interface card. This module enables the connection of a serial 20

mA Current Loop interface. The interface functions both for the transmitter as well as

for the receiver in active or passive operation. DIP switches are provided on the front

for switching the operating mode. At a maximum transmission rate of 9.6 kbits/s,

a line length of up to 1.000 m is possible.

Alstom ESH-700-VL-FO Limelight Exacta Flame Scanner Sensor 22v-dc

Alstom MVAX11J1DA0751A Auxiliary Tripping Relay Supervises Trip Circuit Breaker

Alstom 029.202 426 A/D-D/A-Converter 8 I/O 10V | ADA 232 | Rev:06

ALSTOM PCO214 REV 1 CARD

Alstom Controller SIR4 85kv/1200 V0701624-201101 Untested (clean)

Alstom Alspa Breakout Fuse Board 1SNL491237R0100 Plat Surville Fusible AIT016

Alstom Signaling Wayside Product Type B Series Relay

Alstom Signaling 30800-007-01 Receiver Assembly. Train Rail Transit

ABB Alstom HTGR102976R0001 Spring Loaded Over Pressure Safety Check Valve

CONVERTEAM 70SI01 / 70SI01 

CONVERTEAM 3D8FP1012A / 3D8FP1012A

  • Beckhoff EL1804 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 3 ms, 3-wire connection
  • Beckhoff EL1512 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 1 kHz
  • Beckhoff EL1502 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 100 kHz
  • Beckhoff EL1262-0050 | EtherCAT Terminal, 2-channel digital input, 5 V DC, 1 µs, oversampling
  • Beckhoff EL1262-0010 | EtherCAT Terminal, 2-channel digital input + 2-channel digital output
  • Beckhoff EL1259 | EtherCAT Terminal, 8-channel digital input + 8-channel digital output, 24 V DC, 1 µs, 0.5 A, multi-timestamp
  • Beckhoff EL1258 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 1 µs, multi-timestamp
  • Beckhoff EL1252-0050 | EtherCAT Terminal, 2-channel digital input, 5 V DC, 1 µs, timestamp
  • Beckhoff EL1252-0010 | EtherCAT Terminal, 2-channel digital input, 24 V DC, 10 µs, timestamp
  • Beckhoff ELX1058 | EtherCAT Terminal, 8-channel digital input, NAMUR, Ex i
  • Beckhoff ELX1054 | EtherCAT Terminal, 4-channel digital input, NAMUR, Ex i
  • Beckhoff EK/EC1xxx, BK1xx0 | EtherCAT Couplers
  • Beckhoff BK1150 | EtherCAT Compact Bus Coupler
  • Beckhoff BK1120 | EtherCAT Bus Coupler for standard Bus Terminals
  • Beckhoff EK1960 | TwinSAFE Compact Controller
  • Beckhoff EK1914 | EtherCAT Coupler with integrated digital standard and safety I/Os
  • Beckhoff EK1828-0010 | EtherCAT Coupler with integrated digital outputs
  • Beckhoff EK1828 | EtherCAT Coupler with integrated digital inputs/outputs
  • Kollmorgen Stainless Steel AKMH Series
  • Kollmorgen AKME Series Servo Motors
  • Kollmorgen Essentials™ Servo Motors
  • Kollmorgen Essentials Motors Offer High Performance at an Exceptional Value
  • Kollmorgen Essentials Drive: Plug In. Power Up. Perform.
  • Kollmorgen The Benefits of the Essentials Servo System
  • Kollmorgen AKM2G represents the latest evolution of the industry-leading AKM motor family
  • Kollmorgen AKM® 2G Servo Motors
  • Kollmorgen New AKD2G 24A Drive
  • Kollmorgen Automation Suite™ Motion in Minutes
  • Kollmorgen 1G Motion System
  • Kollmorgen Essentials™ Motion Systems
  • Woodward Gas Stop/Ratio Valve
  • Beckhoff EK1818 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1814 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1541 | EtherCAT Coupler with ID switch, plastic optical fiber
  • Beckhoff EK1501-0100 | EtherCAT Coupler, media converter
  • Beckhoff EK1501-0010 | EtherCAT Coupler with ID switch, single-mode fiber optic
  • Beckhoff EK1501 | EtherCAT Coupler with ID switch, multi-mode fiber optic
  • Beckhoff EK1300 | EtherCAT P coupler
  • Beckhoff EK1122-0080 | 2-port EtherCAT junction, Fast Hot Connect
  • Beckhoff EK1122-0008 | 2-port EtherCAT junction with M8 connection
  • Beckhoff EK1121-0010 | 1-port EtherCAT junction, Extended Distance
  • Beckhoff EK1110-0043 | EtherCAT EJ coupler, CX and ELterminal connection
  • Beckhoff EK1110-0044 | EtherCAT EJ coupler, CX and EL terminal connection, EtherCAT junction
  • Beckhoff EK1110-0008 | EtherCAT extension with M8 connection
  • Beckhoff EC1110 | EtherCAT Terminal extension, RJ45, angled, push-in
  • Beckhoff CU8130-0240 | UPS modul, battery-backed
  • Beckhoff CU8130-0120 | UPS module, battery-backed
  • Beckhoff CU8110-0120 | UPS module, capacitive
  • Beckhoff CU8110-0060 | UPS module, capacitive
  • Beckhoff CX2072 | Embedded PC with Intel® Xeon® D-1567
  • Beckhoff CX2062 | Embedded PC with Intel® Xeon® D-1548
  • Beckhoff CX2042 | Embedded PC with Intel® Xeon® D-1527
  • Beckhoff CX2043 | Embedded PC with AMD Ryzen™ V1807B
  • Beckhoff CX2033 | Embedded PC with AMD Ryzen™ V1202B
  • Beckhoff CX20x3 | Embedded PC series
  • BAUMULLER b maXX 1000 Frequency converter
  • BAUMULLER b maXX 2400 Mini servo controller up to 2 kW
  • BAUMULLER b maXX 3300 Servo controller up to 5 kW
  • BAUMULLER b maXX 4600/4700 Peak and nominal load devices
  • BAUMULLER b maXX 4100 Regenerative power supply unit
  • BAUMULLER b maXX 4400 – The modular servo controller
  • BAUMULLER b maXX-drivePLC
  • BAUMULLER b maXX 4000 Modular servo controller
  • BAUMULLER b maXX 5600/5700 The application specific servo drive
  • BAUMULLER b maXX 5000 The safe, modular servo controller
  • Kollmorgen EtherCAT® Bus Coupler Features
  • LENZE i950 cabinet servo inverter
  • LENZE i750 cabinet servo inverter
  • LENZE i700 cabinet servo inverter
  • LENZE i650 motec frequency inverter
  • LENZE i550 motec frequency inverter
  • LENZE i550 protec frequency inverter
  • LENZE x500 IoT gateway
  • Beckhoff CX5630 | Embedded PC with AMD Ryzen™ R1505G
  • Beckhoff CX5620 | Embedded PC with AMD Ryzen™ R1102G
  • Beckhoff CX56x0 | Embedded PC series
  • Beckhoff CX5340 | Embedded PC withIntel Atom® x6425RE
  • Beckhoff CX53x0 | Embedded PC series
  • Beckhoff CX2500-M510 | Fieldbus master module CANopen for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-M310 | Fieldbus master module PROFIBUS for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-B510 | Fieldbus slave module CANopen for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-B310 | Fieldbus slave module PROFIBUS for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX52x0 | Embedded PC series
  • Beckhoff CX5140 | Embedded PC with Intel Atom® E3845
  • Beckhoff CX9240 | Embedded PC with Arm® Cortex®-A53
  • Beckhoff CX9020 | Embedded PC with Arm® Cortex®-A8
  • Beckhoff CX8290 | Embedded PC with Arm® Cortex®-A53 and 2-port Ethernet switch
  • Beckhoff CX8280 | Embedded PC with Arm® Cortex®-A53 and RS232/RS485
  • Beckhoff CX8210 | Embedded PC with Arm® Cortex®-A53 and EtherCAT slave
  • Beckhoff CX82xx | Embedded PC series, compact PLC
  • Beckhoff CX8191 | Embedded PC with Arm® Cortex®-A9 and BACnet/IP
  • Beckhoff CX7000 | Embedded PC with Arm® Cortex®-M7 and integrated I/Os
  • LENZE I/O system 1000
  • Schneider SAITEL Remote Terminal Unit & Controller
  • Schneider Saitel DP platform M586A0000y / SM_DO16R
  • LENZE C250-S Safety Controller
  • LENZE c520/c550/c750 controllers Powerful – everything under control
  • LENZE C550 Controller
  • LENZE C520 Controller
  • LENZE C430 Controller
  • LENZE c430/c520/c550 controller Powerful – everything under control
  • Omron B7AM-8B16 Mixed I/O Link Module
  • Kollmorgen SN3/SN4 Series AC Synchronous Motors
  • Kollmorgen Direct Drive Linear Motors
  • Kollmorgen Housed D & DH Housed Direct Drive Rotary (DDR) motors
  • Kollmorgen Cartridge DDR® Servo Motors
  • Kollmorgen STF Washdown Motor - Food Grade
  • Kollmorgen AKMA Servo Motors
  • Kollmorgen AKM™ Washdown and Food Grade Servo Motors
  • Kollmorgen AKM™ Series Servo Motor
  • SAACKE FMB-VM Fired Marine Boiler
  • SAACKE SKVJG-M Marine burners
  • B&R X20 system Slice-based I/O and control
  • Triconex Tricon Fault-Tolerant Controller
  • Triconex by Schneider Electric Tricon™ v9–v11 Systems
  • B&R X20cBB80 X20 Base module
  • GE ENERGY HYDRAN H201Ci-1 One-Channel Controller
  • B&R X20cBC0087 Bus controller
  • B&R X20cBC0083 X20 Bus Controller
  • B&R X20cBC0043-10 Bus controller CANopen slave
  • B&R Protected against harsh environmental conditions - Coated X20 system
  • KEBA KePlast i1200 Steuerungssystem der neuen Generation für hydraulische pritzgießmaschinen
  • KEBA KePlast i1100 Optimized performance for standard hydraulic IMMs
  • KePlast i-series The scalable automation solution for injection molding machines
  • KEBA KeView Visualization software
  • KEBA KeTop Reel The automatic cable retraction system
  • KEBA KeTop CB310 Connection options
  • KEBA KeTop T55 Handheld terminal
How to install and debug this product? Matters needing attention
Where can I download the manual and programming software?
Is it in stock or need to be ordered?
Can you provide technical service?
Where can I order this series?
Do you have product selection list and pre-sale service?