Basler Electric AEM-2020 ANALOG EXPANSION MODULE

Mounting Hardware

The AVC Sensing Module can be mounted directly on a genset using #10-32 or

equivalent hardware. A lock washer should be used between the screw head and

body of the module. Torque applied when tightening the mounting hardware

should not exceed 25 inch-pounds (2.8 N•m).

The AVC Sensing Module provides a convenient and cost-effective method

for expanding the applications where AVC63-12 and AVC125-10 voltage

regulators can be applied. The AVC Sensing Module increases the nominal

sensing voltage of style BX AVC63-12 and AVC125-10 voltage regulators

from 200/240 Vac to 480 Vac or 600 Vac. The AVC Sensing Module is

compatible with nominal sensing frequencies of 50/60 Hz and 400 Hz.

A compact, rugged (potted) case enables the AVC Sensing Module to be

mounted directly on the generator.

Other than making connections during installation, the AVC Sensing Module

requires no adjustment or calibration.

MOUNTING –40 to 70°C (–40 to 158°F) operation and storage

95%, non-condensing

160 g (6 oz.)

The AVC Sensing Module is housed in a potted, plastic case that can be

mounted in any convenient position.

Overall module dimensions and panel drilling dimensions are illustrated in Figure 1.

CONNECTIONS

All AVC Sensing Module connections are located on the back panel. Sensing voltage

is applied to the lower, six position terminal block. Sensing voltage is supplied to the

voltage regulator from the upper, three-position terminal block. Connections consist

of #6 terminal screws. Each terminal accepts a maximum wire size of 12 AWG (13

mm2). When securing connections, apply no more than 9 in-lb (1 N•m) of torque to

each terminal screw.

Before connecting the module, review the terminal descriptions listed in Table 1 and

the connection diagram of Figure 2. At any given time, only one of the two sets of 

sensing voltage input terminals can be used. Under no circumstance can both the

480 Vac and 600 Vac sensing input terminals be connected to a voltage source.

Enjoy proven, dependable, high performance with Basler Electric’s AVC line.

These extremely rugged and reliable regulators provide the performance and

functionality that revolutionized the modern analog voltage regulator market,

and they are still unrivaled today. Others have attempted to imitate the AVC’s

features and functions, but only the AVC remains the total solution.

The Basler Microprocessor-Based Reference Adjuster, Model RA-70.

replaces Motor Operated Potentiometers and provides a totally solid

-state method of adjusting the setpoint on Basler Automatic Voltage

Regulators (AVRs), Basler Shunt Static Exciter-Regulators (SSEs),

Basler Manual Voltage Controls (MVCs), the Basler Var/Power Factor

Controller (SCP-250) and other input devices having a rheostat or

potentiometer type control adjustment. The unit is designed for

"behind-the-panel" mounting in switchgear or control boxes.

All controls, inputs, outputs, and LED indicators are located on the

unit's front panel for ease of installation and adjustment.

The RA-70 Reference Adjuster also comes equipped with a 0-1 mA

output signal to operate a position indicator that will indicate the

setpoint position.

Basler Electric 9289902106 Circuit Board Rev A

Basler Electric 9105100106 UFOV-250A Under Freq./Overvoltage Protector

Basler Electric BE1810/U-2 Solid State Frequency Relay BE1810

Basler Electric BE1-67 Ground Directional Overcurrent Protective Relay

Basler Electric 1783 Be1783 Contactor Dc Current Transformer Coil, 1200:5A Ratio

Basler Electric BE25927001 Current Transformer - 1:34 Amp - Tested/1Yr Warranty

Basler Electric BE1-25/ BE1-25M1GA6PN4R3F STOCK G277

Automatic Voltage Regulators DECS100-B15 For Basler Electric Generator

Basler Electric BE3-47N/27-3A4N2 9320400101 120V

Basler Electric Solid State Protective Relay BE1-60

Basler Electric SSR 63-12 STATIC VOLTAGE REGULATOR 600VAC 50/60HZ 9 1859 00 101

Basler Electric SR8A2B01A3E Static Voltace Regulator

Basler Electric PCB Assembly 9059701100 919620

Basler Electric F3EE1PA0N1F BE1-40Q

Basler Electric BE1-81-O/UT3ED1JB6N0F / BE181OUT3ED1JB6N0F

Basler Electric KR2FF-M Voltage Regulator 9 1163 00 103