Modularity of FLEX I/O system provides choice of network and ease of expansion.
The wiring terminations are done almost entirely on the terminal
base. Terminal base termination selection includes screw-clamp, spring-clamp,
and cage-clamp to wire directly to 2-wire, 3-wire, or 4-wire
devices. Additional options of D-shell, knife disconnect, and fused terminal bases are also available.
Adjustable keyswitch helps prevent incorrect module insertion into a pre-configured terminal base.
Terminal bases can be exchanged without moving other bases in your system.
If desired, connect individual power supplies to each base to isolate modules.

Plug the I/O module into the terminal base to connect the I/O bus and field devices.
Remove and insert modules under power. No direct wiring to the module enables
you to change modules without disturbing field wiring or system power.
Mix and match I/O modules. There is a wide variety of digital, analog, and specialty modules.
Each FLEX I/O system contains at least one adapter, one terminal base, and one I/O module.
Features and Benefits Enhanced Performance and Troubleshooting
• Synchronizes third-party devices to our integrated motion system
• Configure and program with Studio 5000 Logix Designer® Software
• In-cabinet installation mitigates the need to mount encoders on the machine
• Reduces wiring
Increased Flexibility
• Syncs with any axis of motion. It is not limited to nearby axis.
• Configurable output: quadrature or pulse train
• Dual Ethernet ports support a variety of network topologies
• Provides role-based access control to routines and Add-On Instructions
The innovative snap fit bus system requires no tools and can help you to more easily
assemble and install. The Kinetix 5700 also incorporates Load Observer real-time tuning
technology, yielding high performance control while mitigating the need to tune most axes,
thus reducing your commissioning time. DSL Feedback ports support single cable technology
and helps simplify wiring with Allen-Bradley® Kinetix VP motors.
| Woodhead 1200720178 Micro Change Cord Set | 
| Woodhead 5AA73 1200651072 Micro-Change 4P Female Cord Set | 
| DANIEL WOODHEAD 81230-007 883032D01M005 CORDSET | 
| Daniel Woodhead Brad Harrison Mini-Change Cord Set 41107+ 4P Female 3' | 
| WOODHEAD 40902 Mini Change Cordset | 
| Woodhead Brad Harrison 703000A13F120 Micro Change Cordset 3 Pin Female Straight | 
| Woodhead 1200870097 Nano-Change 4P 4-Pole Male-Female Extension 4M 444030A10M040 | 
| Molex/Woodhead E11A06002M080, 1201080039 Micro-Change Cordset - | 
| WOODHEAD / BRAD HARRISON 41109-90 16AWG/4 600V 10A 4PIN 12FT MINI CHANGE CORDSET | 
| WOODHEAD 1300060737 4 PIN FEMALE RECEPTACLE CORD SET | 
| Brad Connectivity / Woodhead 1200490417 Micro-Change Cordset 1M | 
| Woodhead Sensor Cord Set 40974 | 
| WOODHEAD/BRAD HARRISON A7712529101 CORD SET 9 PIN CONNECTOR END | 
| Brad Harrison Woodhead Micro Cord Set # 804000B02M050 (33331-BPR6) | 
| User name | Member Level | Quantity | Specification | Purchase Date | 
|---|
	
		
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved