Basler Electric SSR125-12 STATIC VOLTAGE REGUALTOR 9185900102

The Electronic Manual Voltage Control MVC-300 is a solid-state device en

closed by a wrap-around metal chassis. The MVC-300 is for mounting through

a panel with controls accessible from the front of the panel or can be mounted

behind the panel. A terminal strip located on the rear of the device facilitates

installation. A manual voltage adjust potentiometer and a manual-off-auto

switch are provided on the front face of the unit. For use of a user-supplied

external manual adjust potentiometer or for adjust by a motor operated control

(MOC), order MVC-301. The MVC-300 and MVC-301 are designed to operate

with Basler voltage regulators powered from 120 or 240 volt AC sources up to

320 Hz. The adjustable output of the MVC-300 supplies power to 32. 63 or 125

volt fields at 7 amps.

APPLICATION:

The Electronic Manual Voltage Control MVC-300 allows a generator’s output

voltage to be controlled manually by a potentiometer or automatically by a

voltage regulator. It is used as a back-up system for the automatic voltage

regulator. The unit can be mounted on a control panel in ground vehicles,

stationary equipment or shipboard locations.

Benefits

• Accurate protection provided by true var measurement.

• Minimized CT and PT costs as a result of low sensing burden.

• Reduced battery load with low burden power supply.

• Accurate, repeatable, and reliable operation.

• Simple HMI provides clear and intuitive settings for easy

configuration.

The BE2000E is an environmentally rugged product designed to control

the output of brushless excited synchronous generators equipped with

single-phase PMGs (permanent magnet generators).

Enjoy the benefit of Basler Electric’s years of experience and support of

excitation control systems when choosing the BE2000E as an ideal DVR®

replacement voltage regulator.

The DGC-2020HD provides analog outputs to the power system in the

form of analog bias signals to the voltage regulator and speed governor.

A pulse width modulated (PWM) speed bias output is also available.

When the generator breaker is closed and load sharing is enabled, the

DGC-2020HD shares the real power load proportionally with other

generators in the system. Load sharing can be implemented on the Analog

Load Share Line or through Ethernet communications. Reactive power

(kvar) sharing is accomplished through Ethernet communications.

The DECS-200N is a very compact Negative Forcing Digital Excitation

Control System.

Engine Protection and Metering

Engine protection features include oil pressure and coolant temperature

monitoring, overcrank protection, ECU-specific protection elements,

and diagnostic reporting.

Metered engine parameters include oil pressure, coolant temperature,

battery voltage, speed, fuel level, engine load, coolant level (from ECU),

ECU-specific parameters, and run-time statistics.

Basler Electric, Solid State Protective Relay, BE1-60

Basler Electric SSE-N 250-9 KW Shunt Static Exciter-Regulator

Basler Electric MVC 232 MANUAL VOLTAGE CONTROL 9037000103

Basler Electric OVERCURRENT RELAY, BE1-50/51M-104

Basler Electric BE1-40Q Solid State Protective Relay/ Loss Of Excitation Relay

Basler Electric BE1-25 SYNC-CHECK RELAY M1E A7P A5N3F

Basler Electric BE1-81-T1E-E1C-B0N1F / BE181T1EE1CB0N1F

Basler Electric BE1-47NE3EA1PA0N2F / BE147NE3EA1PA0N2F

Basler Electric BE1-87G-G1E-A1K-A0N0F / BE187GG1EA1KA0N0F

Basler Electric BE1-81O/UT3EE1YA9S0F / BE181OUT3EE1YA9S0F

Basler Electric KR2FF Voltage Regulator 9 1163 00 109

Basler Electric MVC-300 MANUAL VOLTAGE CONTROL UNIT 9121000106

Basler Electric Contact Expansion Module CEM-2020

Basler Electric BE1-25/79TR Reclosing Relay BE1 25 79TR

Basler Electric BE1-67 / BE167 DIRECTIONAL OVERCURRENT RELAY

Basler Electric BE1-50F2EA1PA0N0F NSMP

Basler Electric BE1-32O/U, Protective Relay

Basler Electric BE1-40Q Loss Of Excitation Relay BE140Q F3EE1RA1N1F