The DIN rail mounted FBMs accommodated by the baseplate are compact,
plug-in modular assemblies used to interface field devices with the host control
station. The FCMs, having the same form factor as the FBMs,
perform signal interface functions. For example, FCM10Es are used to interface
the Ethernet trunk Fieldbus with the 2 Mbps module Fieldbus, and FCM2Fs
are used for fiber opticcommunications extensions between baseplates.
The FBMs and FCMs plug onto the baseplate by means of their two,
48-pin connectors, and each is fastened in place by two screws.

The EcoStruxure™ Foxboro™ DCS Field Control Processor 280 (FCP280) is a distributed,
optionally fault-tolerant, field-installable controller module.
The FCP280 performs regulation, logic, timing, and sequence control with
connected Foxboro DCS Fieldbus Modules (FBMs).
It also performs data acquisition, alarm detection, and notification.
The FCP280. through a chassis-mounted network adapter, is connects to the Foxboro DCS
control network with standard fibre optic or 100 Mbps copper cable (see figure below).
The FCP280 requires Foxboro DCS Control Core Services Software v9.0 or higher.
A system with the FCP280 and this software is called an EcoStruxure
Foxboro DCS Process Automation System.
The FBM233 Redundant Field Device System Integrator (FDSI) module
provides an Ethernet interface between single- or dual-port field I/O devices
and the EcoStruxure™ Foxboro™ DCS.
Each FBM233 module has an RJ-45 connector (10/100Mbps copper
Ethernet connection) on the front of the module for connecting dual-port
Ethernet devices.
The FBM233 connects to an Ethernet switch or hub to communicate with one
external device or up to 64 external devices.
The combination of a pair of modules provides redundancy at the fieldbus
module (FBM) level. In this configuration, one FBM233 is the master and the
other is the tracking module. Input points on the control station are updated
from device input points received on the network connected to the master.
Device output points (depending on the I/O driver) are written by both the
master and the trace module.
FOXBORO A4H254-8F8T P0973JP Managed Ethernet Switch |
Foxboro P0916AA Field Terminal Assembly |
Foxboro P0916FH Terminal Assembly |
Foxboro FBM211 Discrete I/O Module |
Foxboro P0926KN Baseplate Cable |
Foxboro FBM214 Input Interface Module |
Foxboro FBM218 Input Interface Module |
Foxboro FBM219 Input Interface Module |
Foxboro FCM100ET Redundant Fieldbus Communications Module |
Foxboro H92 Workstation for Windows Operating Systems |
Foxboro P0973CN I/A Series Expansion Backplane Module |
Foxboro P0904AK GCIO Tabletop Module Brand |
Foxboro P0924JH DIN Rail Mounted Compact 200 Series I/O Equipment |
Foxboro RH924WA Fiber Optic Network Adapter |
Foxboro N-2AX+DIO Input/Output Module |
Foxboro RH928AW Redundant power supply module |
Foxboro P0926GJ I/A Series Industrial Control Module |
Foxboro H90 H90C9AA0117S Control Module |
Foxboro RH926GH Modbus Master RTU Serial Driver |
Foxboro FBM217 Input Interface Module |
Foxboro AD916AE Digital Control System |
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
wechat/whatsapp:
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved