ABB SYNCHROTACT® Accessories Fast commissioning with SynView

SYNCHROTACT® Accessories Fast commissioning with SynView

SynView is a tool for simple and fast commissioning of

SYNCHROTACT® 5 devices. The PC software runs under

MS® Windows™ NT, 95. 98. 2000. XP and Windows 7 in the

standard languages German, English or French. SynView

consists of five functions explained below:

Parameter tool

All parameter settings are carried out using this tool. The files

can be stored on the PC and copied to other units. Helpful

functions such as comparing parameter settings between

device and PC-file, or the display of recommended setting

values, greatly simplify commissioning and servicing.

Transient recorder tool

The voltage difference and paralleling command from the

last three synchronizing processes are displayed. As such a

separate recorder is unnecessary.

Actual values tool

A synchroscope, together with all the values important for

paralleling, is displayed on the user interface. These simplify

function-testing of the synchronizing process if no instruments

are available.

Event recorder tool

The 256 events stored in SYNCHROTACT® 5 are displayed

in plain text with date and timestamp. This greatly simplifies

the localization of faults, eg wiring or control faults which

sometimes occur during commissioning.

Diagnostic tool

In difficult cases where problems cannot be solved on site,

this tool helps the manufacturer to identify the causes of the

problem from the data stored in this tool.