SYNCHROTACT® Accessories
Auxiliary device SYN 5500
The auxiliary device SYN 5500 connects the measuring
and command circuits where several paralleling points
need to be switched. An SYN 5500 device can switch two
paralleling points, each with a maximum of 16 contact pairs,
or alternatively, four paralleling points, each with eight contact
pairs. Several devices can be used at the same time.
Technical data
Maximum contact voltage 250 VAC/VDC
Limiting continuous current 10 A
Maximum switching power ON AC/DC 1500 VA/W
Maximum switching power OFF AC/DC (resistive) 1500/150 VA/W
Coil nominal voltage 24 VDC
Operate voltage > 18 VDC
Release voltage < 3.6 VDC
Coil resistance 1152 Ω
Coil inductivity 1000 mH
Casing size (W x H x D) 381 x 128 x 50 mm
Hat rail mounting (DIN)
Electromechanical instruments are commonly used if the
synchronizing system provides a manual synchronizing
feature. Sometimes the instruments are used in automatic
synchronizing systems for information only, eg, for servicing
purposes. This requirement can also be covered by the
SYNCHROTACT® 5 PC-tool SynView.
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved