Foxboro P0973JP 8-PORT COPPER / 8-PORT FIBER MANAGED SWITCH

OVERVIEW

The 8-Port Copper/8-Port Fiber managed switch

(P0973JP) provides eight (8) 100Base-TX ports with

RJ-45 connectors, eight (8) 100Base-FX ports with

MT-RJ connectors, two fixed 10/100/1000 Ethernet

ports and two 1000Base-X uplink (ISL) Gigabit (SFP)

ports.

The two 1000Base-X uplink (ISL) Gigabit (SFP) ports

can be populated with Mini-GBIC uplink (ISL)

connector modules listed in Table 4.

The switch allows high-performance, full-featured

layer-2 Ethernet switching in small to medium-sized

network applications, as well as high-performance

direct end-station connectivity.

FEATURES

The 8-Port Copper/8-Port Fiber managed switch

features:

 8-ports of 100Base-FX (RJ-45)

 8-ports of 100Base-TX

 Two fixed RJ-45 10/100/1000 ports, configurable

for 100Base-Tx or 1000Base-TX for devices or

1000Base-TX for (ISL) uplink ports

 Two 1000Base-X uplink Gigabit (SFP) ports

 MT-RJ connectors on switch 100Mb fiber ports

 Full-duplex operations

 Supports VLAN configurations

 Configuration tasks through a local console port,

and monitoring through any SNMP/RMON based

management application.

 Port mirroring technology and diagnostics that

allow local network traffic to be redirected to an

external probe for detailed analysis

 When installed with the optional redundant power

supply, there is no single point of failure due to

power disruptions.

NOTE

Two separate branch circuits are required for

redundant power.

 Shelf, desk, or 19-inch rack mounting.

OPTIONAL REDUNDANT POWER SUPPLY

Refer to “P0973JX REDUNDANT POWER SUPPLY”

on page 19.

UPLINK/SWITCH INTERFACES

Table 3 lists the 8-Port Copper/8-Port Fiber switch

and the MGBIC modules that can be added to the

switch. The MGBIC modules are added to specific

SFP ports to provide connectivity for ISL ports.

FUNCTIONAL SPECIFICATIONS

8-PORT COPPER / 8-PORT FIBER MANAGED SWITCH (P0973JP)

Ethernet Standards Supported

 IEEE 802.1q VLAN support

 IEEE 802.1d MAC Bridging (including STP)

 IEEE 802.1p Quality of Service (QoS, Priority)

 IEEE 802.1w Rapid Spanning Tree (RSTP)

 IEEE 802.3 including:

• Fast Ethernet: IEEE 802.3u, 100Base-FX

and 100Base-T (Fiber/Copper)

• Gigabit Ethernet: IEEE 802.3z, 1000Base-X

(Fiber)

• Gigabit Ethernet: IEEE 802.3ab, 1000Base-T

(Copper)

Power

INTERNAL

AC Input power (auto-sensing)

100 V AC to 240 V AC, 50 to 60 Hz

EXTERNAL

Supports connection for redundant power supply

MAXIMUM POWER CONSUMPTION

47 Watts

MAXIMUM HEAT DISSIPATION

160 BTUs/Hr

MAXIMUM CURRENT

0.5 A at 110 V AC, 0.47 A at 220 V AC