Foxboro P0973KJ 26-GIGABIT (SFP) PORT MANAGED SWITCH

OVERVIEW

The 26-Gigabit (SFP) Port managed switch

(P0973KJ) provides 24 modular 1000Base-X Gigabit

(SFP) ports and two (2) SFP+ ports. All 26 ports can

be populated with Mini-GBIC uplink connector

modules listed in Table 4.

24 1000Base-X SFP ports can be populated with the

100Base-FX Mini-GBIC (P0973JE) module for device

connectivity if the switch is running on firmware

06.61.08.0013 or greater.

The switch allows high-performance, full-featured

layer-2 Ethernet switching in small to medium-sized

network applications. It has been designed to be

utilized as an uplink switch in the control network.

FEATURES

The 26-Gigabit (SFP(1)) Port managed switch

features:

 24 1000Base-X Gigabit (SFP) and two SFP+ports

configurable as 1G (ISL) uplink ports or end

device connectivity

 Full-duplex operation

 Configuration tasks through a local console port,

and monitoring through any SNMP/RMON based

management application

 Port mirroring technology and diagnostics that

allow local network traffic to be redirected to an

external probe for detailed analysis

 When installed with the optional redundant power

supply, there is no single point of failure due to

power disruptions

NOTE

Two separate branch circuits are required for

redundant power.

 Shelf, desk, or 19-inch rack mounting

It delivers extensive Layer 2/3/4 packet classification

and marking based on any of the following:

 MAC address

 Physical port

 IP address

 IP Protocol

 TCP/UDP port

 IP subnet

 Address Resolution Protocol (ARP) & ARP

Redirect

OPTIONAL REDUNDANT POWER SUPPLY

Refer to “P0973JX REDUNDANT POWER SUPPLY”

on page 19.

UPLINK/SWITCH INTERFACES

Table 3 lists the MGBIC modules that can be added

to the 26-Gigabit (SFP) Port Managed Switch

(P0973KJ) switch. The MGBIC modules are added to

specific SFP ports to provide connectivity for ISL or

device ports.

FUNCTIONAL SPECIFICATIONS

26-GIGABIT (SFP) PORT MANAGED SWITCH (P0973KJ)

Ethernet Standards Supported

 IEEE 802.1q VLAN support

 IEEE 802.1d MAC Bridging (including STP)

 IEEE 802.1p Quality of Service (QoS, Priority)

 IEEE 802.1w Rapid Spanning Tree (RSTP)

 IEEE 802.3 including:

• Fast Ethernet: IEEE 802.3u, 100Base-FX

(Fiber)

• Gigabit Ethernet: IEEE 802.3z, 1000Base-X

(Fiber)

• Gigabit Ethernet: IEEE 802.3ab, 1000Base-T

(Copper)

Power

INTERNAL

AC Input power (auto-sensing)

100 V AC to 240 V AC, 50 to 60 Hz

EXTERNAL

Supports connection for redundant power supply

HEAT DISSIPATION

223.1 BTUs (65.4 watts)/hr

POWER CONSUMPTION

29 Watts

MAXIMUM CURRENT

1.5A