Beckwith Electric M-2264B Adapter Panel

The M-2264B is an adapter panel which, when combined with the M-2001 Series

Digital Tapchanger Control, provides convenient direct replacement of balance

beam controls for General Electric ML-32 regulators.

The M-2264B mounts into the control cabinet using the same two thumbscrews

which must be saved from the original control.

• Connects easily to the M-2001 Series Digital Tapchanger Control using mounting

screws and 24-pin connector

• Provides direct mechanical replacement of the existing regulator control using

the same two thumbscrews

• Provides built-in CT shorting protection when the M-2001 Series Digital

Tapchanger Control is removed

The M‑2264B is an adapter panel which, when combined with the M‑2001 Series

Digital Tapchanger Control,

provides convenient direct replacement of balance beam controls for General

Electric ML‑32 regulators.

The M‑2264B mounts into the control cabinet using the same two thumbscrews

which must be saved from the original control.

Interface

External connections are made via a wiring harness that connects from a fifteen

‑position terminal block to

the terminal block on the existing control cabinet. An additional terminal block

provides access to auxiliary

functions, including self‑test alarm, user‑programmable alarm, auto disable and

manual raise/lower.

Features

Separate fuses for voltage sensing and motor power are on the front panel.

Spare fuses for each are in the fuse holder.

Binding post on the front panel allows easy connections for test procedures.