Features
Available in 64. 128. 256 and 512 Kbytes
For expansion of CPU 771. CPU 772. or PCM
Memory retained by battery on CPU or PCM
Does not require additional slot
Configurable for data and program storage
Error checking by CPU checksum routine
No tools required for installation
Field Installable
Functions
This CMOS Expansion Memory is available in four
versions; 64. 128. 256 and 512 Kbytes. This memory
may be used to expand logic and data memory in ei
ther the CPU 771 (IC697CPU771) and CPU 772
(IC697CPU772) modules, or the Programmable Co
processor Module (IC697PCM711). It is installed as a
daughter board and resides in the same slot as the
module it serves. Memory on this board supplements
memory available on the base board.
CMOS Expansion Memory
Memory is retained in the event of power loss by the
battery on the base board housing.
Logic program memory is continually error-checked
by the PLC CPU as a background task.
The PCM error checks storage memory when power
is cycled and on hard or soft resets.
Installation
Installation should not be attempted without refer
ring to the applicable Programmable Controller
Installation Manual (See reference 4).
Make sure rack power is off.
Plug the 64 pin connector into the connector on
the base board, and engage snaps.
Place module in rack.
Turn power on.
CPU Installation:
Clear memory using either MS-DOS or
Windows programming software following
instructions in the Programming Software User's
Manual (See reference 1).
PCM Installation:
For the PCM follow the instructions in the Pro
grammable Coprocessor Module Support Software
User's Manual (See reference 3).
Batteries
The Lithium battery (IC697ACC701) is installed as
shown in figure 1. This battery maintains user
memory when power is removed and operates the
calendar clock on the PLC CPU. Be sure to install the
new battery before removing the old battery. Specific
indication of a low battery state is detailed in References 3 and 4.
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved