GE IC200PWR202 Power Module with Expansion Features

Description: The GE Fanuc IC200PWR202 module is a power supply module with extended capabilities in the Versamax family.

It has an input voltage range of 9.5 to 15 volts DC, a nominal voltage of 12 volts DC, and output voltages of 5 volts DC and 3.3 volts DC.

About the IC200PWR202

The GE Fanuc Versamax IC200PWR202 power supply module features expanded functionality with up to 3-volt DC extended power supplies.

This module does not have an isolated power supply like other power modules in the Versamax family.

This device can power backpPLC channel devices including I/O modules, CPUs, and NIUs.

It can be used as a primary or secondary power supply in a system, especially when installed on a power booster carrier.

The GE Fanuc IC200PWR202 power supply module has an input voltage range of 9.6 to 15 volts DC and a nominal voltage of 12 volts DC.

Its output voltage is 5 volts DC or 3.3 volts DC. The module has a hold time of approximately 10 milliseconds and is rated at 11 watts of input power.

The GE Fanuc IC200PWR202 power supply module has an inrush current rating of 25 amps at 12 volts DC and 30 amps at 15 volts DC.

The total output current of the IC200PWR202 power supply module should not exceed 1.5 amps. When the output voltage is 3.3 volts DC, the output current is 1.0 amp.

When operating at 5 volts DC output current, the maximum output current is 1.5 amps minus 3.3 volts used.

The power supply module is designed with reverse polarity, short circuit, and overload protection.

The dimensions of the IC200PWR202 power supply module are 49 mm (1.93 in.) x 133.4 mm (5.25 in. x 39 mm (1.54 in.), not including DIN rail or carrier height.