GE IC200ALG432 Analogue module with hybrid inputs

Description The IC200ALG432 module is an analogue module with mixed inputs. It is a Versamax module manufactured by GE Fanuc.

About the IC200ALG432

The GE Fanuc IC200ALG432 module is a hybrid analogue module that uses a 10-volt DC power supply.

It is a 12-bit module with four channels and two output channels. The analogue module has an update rate of 0.4 ms and an input response time of 5 ms.

The analogue module requires an external power supply to power the outputs. The inputs of the module are powered by an external power supply for the transceiver.

The CPU in the module is responsible for processing the operation.The LEDs on the front of the IC200ALG432 module indicate the flow of power and backplane current.

There is no thermal derating with this hybrid module. the total current consumption of the IC200ALG432 module during normal operation is 160 milliamps, including load current.

The module's diagnostic features help detect losses in the user-side power supply.

The GE Fanuc IC200ALG432 module comes with configurable alarms that can be set for different events.

During installation, the module should be protected from electromagnetic noise and airborne contaminants. The temperature of the installation area should not exceed 60 degrees Celsius.

The accuracy of the module depends on the ambient temperature. At 25 degrees Celsius, the accuracy is +/-0.3% of full scale; at 60 degrees Celsius, the accuracy is +/-0.3% of full scale.

At 60 degrees Celsius, the maximum accuracy is +/-1%. IC200ALG432 modules have a resolution of 8 counts.

The common mode voltage of the module is 0 V. The IC200ALG432 module has a bus current consumption of 60 mA when operating from a 5 V supply.