GE IC695CPE330 PACSystem RX3i Controller Central Processor

Description: The GE Fanuc / Emerson Automation IC695CPE330 is a PACSystem RX3i controller. The controller has 64MB of RAM and 64MB of non-volatile user memory, and a processor speed of 1 GHz.The controller has two (2) independent 10/100/1000 Gbps Ethernet ports and one (1) USB host port, and provides an embedded switch via a LAN 2 connection. The controller supports hot standby configurations with PROFINET controllers, Ethernet (EGD) and Genius IO.

The IC695CPE330 is a GE Fanuc / Emerson Automation controller that is part of the PACSystem RX3i automation platform. It is a controller module classified as a Programmable Automation Controller (PAC) with a variety of enhancements and important features that meet today's application requirements and emerging technologies. These include modern redundancy features available through PROFINET controllers, Ethernet (EGD) and Genius IO, as well as a large user memory of 64 MB and 64 MB of non-volatile memory. The controller is also equipped with a modern microprocessor with a processing speed of 1GHz. The controller also supports Gigabit for connection to Ethernet networks with transmission rates of 10/100 Mbps and 1Gbps.

Embedded Ethernet communication ports enable controller and media redundancy, thus increasing the availability of the I/O modules. These Ethernet ports feature a dedicated microprocessor core that allows the IC695CPE330 controller to simultaneously perform up to 48 SRTP server connections and 16 Modbus®/TCP server connections with up to 32 clients (SRTP or Modbux/SRTP) per connection.

In addition, the USB 2.0 master port allows uploading and downloading of programmes using ordinary USB flash drives and smartphones. This feature makes it easy to maintain the operation of the RX3i control system.

The IC695CPE330 supports programming languages such as Ladder Diagram (LD), Structured Text (ST), Function Block Diagram (FBD), or C. The IC695CPE330 also supports communication with third-party devices through OPC UA, an industry standard that can be implemented over Ethernet IP connections.

The IC695CPE330 CPU also supports a variety of IO protocols such as PROFINET, EGD, Modbus TCP, PROFIBUS, Genius, DeviceNet, Modbus RTU, and Reflected Memory (CMX) protocols. It is part of the RX3i family of CPUs with an embedded Ethernet/PROFINET interface.

The IC695CPE330 RX3i PacSystems CPU also supports the Rackmount PROFINET Controller Module for communications.The IC695ACC402 Energy Pack, IC695ACC412 Capacitor Pack, and the IC695CBL002 Connection Cable are some of the optional accessories for this module. The module panel has 6 LED status indicators, pushbuttons, and a 3-position run mode switch for easy monitoring and operation. The CPU must be mounted in the mainframe of an RX3i PLC system to integrate with any RX3i I/O module or Intelligent Option Module. Supporting up to 32K discrete and analogue I/O points, the IC695CPE330 RX3i CPU is the best choice for multi-layer communication and handling large amounts of data in complex industrial applications.

IC695CPE330 Frequently Asked Questions

Does the IC695CPE330 support Gigabit Ethernet transfer speeds?

Yes, the IC695CPE330 supports Gigabit Ethernet transmission speeds. It supports 10/100 Mbps and 1Gbps transfer rates.

Does the IC695CPE330 support redundant controller configurations?

Yes. Etehrnet redundant configurations are possible with PROFINET controllers, Ethernet (EGD), and Genius IO.

What is the maximum number of blocks supported by the IC695CPE330?

The IC695CPE330 supports up to 512 blocks of up to 128 KB each.

Technical description of the IC695CPE330

The IC695CPE330 RX3i CPU is a central processing unit manufactured by GE Fanuc. It has 2 sockets, 8 local racks, 32K discrete and analogue input/output points, 64 MB of user memory, and a 1.6 GHz dual-core processor.