Eaton MOPEG240C Module Motor Operator Module

About the MOPEG240C

The MOPEG240C module is a motor operator module manufactured by Eaton Corporation.

The module is designed for use with Eaton's G-Series E-frame line of

of EGB, EGE, EHC, EGS and EGH circuit breakers.

It is rated for 100 to 220 volts AC or 100 to 220 volts DC operating voltage,

1 amp inrush current and 50 to 60 Hz operating frequency.

The Motor Operator Module allows the user to remotely or locally switch the ON,

OFF and RESET functions of the circuit breaker remotely or locally.

Both modes of operation support manual and automatic control of the unit.

In manual mode, the operation keys included with the MOPEG240C Motor Operator Module

can be used to locally open, close, or reset circuit breaker contacts via the locking holes.

Remote control of the MOPEG240C Motor Operator Module involves the use of its built-in

motor and cam drive mechanism to adjust the assembly that operates the circuit breaker handle.

The unit shall be mounted on the front cover of the circuit breaker within its dimensions.

The internal limit switches and relays on the unit are tasked with controlling motor

operation by ensuring that the circuit breaker handle only moves within a defined range.

The Eaton MOPEG240C motor operator module can be manually tripped via its push-button trip button.

It contains a pull-out locking mechanism for locking the circuit breaker handle in the

OFF position with a padlock and can be used for standard load transfer switching applications.

The status of the unit can be seen by the status indicator on the front cover.

MOPEG240C Technical Description

The Eaton MOPEG240C motor operator operates at 1 amp and 100-220 volts DC.

It has a pushbutton trip button and a manual operation key.