Scanlab intelliDRILLse II – smart drilling

Key Features

• Fast step response times permit highest throughput

• New motor design with improved thermal management

• Lightweight beryllium mirrors

• Digital dynAXISse encoder technology

• Drill time optimization(1):

- automatic jump time setting for all jump lengths

- time-efficient parallel handling of positioning and laser delays

• On request also available with SCANahead technology

Typical Applications

• PCB industry

• Via hole drilling

• Percussion drilling

Specifications

Aperture 20 mm

Maximum scan angle(2) ± 0.349 rad

Wavelength(3) 9400 nm

Step response

(positioning and settling to ±5 μm at

100 mm focal length)

0.22 ms at 0.25 mm

0.25 ms at 0.5 mm

0.34 ms at 1 mm

Temperature drift(2) Offset: < 10 μrad/K

Gain: < 5 ppm/K

Long-term drift(2)

(8-hour-Drift after 30 min warm-up,

at constant ambient temperature and load)

Offset: < 50 μrad

Gain: < 50 ppm

Power supply requirements 48 V, 6 A (RMS)

Water cooling requirements 3 l/min at 20 °C and

Δp < 1 bar, p < 4 bar