Kollmorgen SERVOSTAR® 600 Operating modes

Input/output expansion card (option)

- Field installable

- 14 24V digital inputs, PLC compatible

- 8 24V digital outputs, PLC-compatible

- 24V PLC Interface

Communication

- RS-232 interface

Operating modes

- Torque control - from analogue or digital command

- Speed control - from analogue or digital command

- Pulse following

- Gearing from four encoder inputs

- Motion Tasks

- Serial commands

Diagnostics

- 3-digit seven-segment LED display

- Error history

- Internal variable monitoring

- PC Range

Motor Feedback

- Motor Feedback Regulator

Motor Brake Control

- The optional 24V holding brake in the motor can be directly controlled by the

The 24V optional brake in the motor can be directly controlled by the SERVOSTAR 600.

Power Input

- 400 to 480VAC 3-phase, 50 or 60 Hz, built-in line filter, CE compliant

- 24 VDC @ 1 amp (3 amps with brake) for logic circuits

Power Regeneration Options

- Internal

- External - uses BAR packaged resistors

- Bus sharing - distributes regenerative power among multiple amplifiers

Built-in parameter unit

- Displays drive status information

- Parameters: Drive Address, Baud Rate, Speed Loop Adjustment, Motor Type,

Position Output Message Format, Speed Loop Adjustment, Motor Type, Position Output Message Format,

Motor Type, Position Output Message Format, Brake, Regenerative Type

I/O Option Card

I/O option cards are a very economical way to operate servo controllers under position control for simple automation tasks.

With 14 additional digital inputs, motion tasks stored in the SERVOSTAR®600 motion task memory can be selected and started.

All important functions of the position controller are integrated in the servo controller

and can therefore be operated via a separate compact control system.

8 digital outputs report the status of the drive to a higher-level control system.