Pierre Magnetics: Versatile Safety Encoder Launched

At the end of 2024. Pirmina will introduce a second generation of multi-functional safety encoders with the IO link safety bus communication method.

In the past, safety encoders in the industry were only able to connect safety signals to the control system by means of hard-wired cables;

Through the hard wiring method, not only because of the wiring error to form the use of the impact, and because of the limitations of the number of hard wiring cores, can't be safety grating function status, data parameters and so on complete send to the control system.

Therefore, the new generation of multi-function safety encoder PSENopt II Advanced IOLS will be launched to compensate for these shortcomings.

Provide users with faster product use, more accurate parameter information, more powerful use of the function.

From the point of view of the use of fast, the new multi-function safety encoder has two wiring methods, the first is to retain the hard-wired method, the first is to retain the hard-wired method, the first is to retain the hard-wired method.

The first is to retain the hard-wired method, can through one end of the aviation plug, one end of the loose wire cable grating signal access control system for signal processing;

The second is to use the IO link cable, through the two ends of the aviation plug fast connection, the safety encoder into the IO Link safety collector, and then through the IO link safety and the POSC.

Then through the IO link safety and Profisafe and other safety protocol data transfer, the safety grating data information to the control system, for more messy operation.

This saves installation time and avoids wiring errors, while ensuring data accuracy and versatility.

From the point of view of data accuracy, the new multi-function safety encoder through the IO link safety protocol, can be its own product status, safety output signal quality, the use of functionality.

Safety output signal quality, the use of functional information, etc. safe, accurate and fast transmission to the control system.

Through the IO link safety device setup software can not only read the safety encoder related information, real-time monitoring, such as each beam condition information, safety encoder fault code, safety encoder operation status and other parameters;

Also can set the safety encoder use function, such as activate shielding function, activate the function of fading, activate part of the shielding / fading function, start reset function and so on.

Safety sensors with IO link safety function can provide accurate data information.

From the product function point of view, the new multi-function safety grating can realize the shielding and concealment function through the product itself.

Shielding is the entrance and exit goods for character separation monitoring a common safety function, through the safety grating before and after the shielding sensor cooperation, to ensure that in the case of goods blocking grating, safety grating signal will not be blocked, the safety grating signal will be blocked.

Safety grating signal will not be blocked, but people break into the situation, safety grating signal blocking;

Silencing is when the grating detection area of fixed objects or a specific size of the object movement, can be set to fade a certain number of beams, even if a certain number of beams are blocked, but also to ensure that the safety grating signal will not be blocked.

Can also ensure that the safety grating signal will not be blocked. In addition, monitoring the status of each beam, beam coding, distance detection, etc. can be configured through the software.

The upcoming multi-functional safety encoder PSENopt II Advanced IOLS not only has the above new features, but also combines the functions of the original series: no dead zone detection;

Finger, palm and body protection models; meets EN/IEC 61496-1/-2 norms: Type 3 / PL d / SIL 2. Type 4 / PL e / SIL 3 safety levels;

Protective height scale: 300-1800 mm; anti-impact function up to 50G and other characteristics.

We hope that the launch of the new product can be used in more special application environments to provide customers with more safe, fast and rich application experience.