Foxboro P0973JM 24-PORT COPPER MANAGED SWITCH

OVERVIEW

The 24-Port Copper managed switch (P0973JM)

provides 24 100Base-TX ports with RJ-45

connectors, two fixed 10/100/1000 Ethernet ports

and two 1000Base-X uplink (ISL) Gigabit (SFP) ports.

The two 1000Base-X uplink (ISL) Gigabit (SFP) ports

can be populated with the MGBIC uplink (ISL)

connector modules listed in Table 3.

The switch allows high performance, full-featured

layer-2 Ethernet switching in small to medium-sized

network applications, as well as high performance

direct end-station connectivity.

FEATURES

The 24-Port Copper managed switch features:

 24 ports of 100Base-TX (RJ-45)

 Two fixed RJ-45 10/100/1000 ports, configurable

for 100Base-Tx or 1000Base-TX for devices or

1000Base-TX for (ISL) uplink ports

 Two 1000Base-X uplink Gigabit (SFP) ports

 Full-duplex operation

 Supports VLAN configurations

 Configuration tasks through a local console port,

and monitoring through any SNMP/RMON based

management application.

 Port mirroring technology and diagnostics that

allow local network traffic to be redirected to an

external probe for detailed analysis

 When installed with the optional redundant power

supply, there is no single point of failure due to

power disruptions.

NOTE

Two separate branch circuits are required for

redundant power.

 Shelf, desk, or 19-inch rack mounting.

OPTIONAL REDUNDANT POWER SUPPLY

Refer to “P0973JX REDUNDANT POWER SUPPLY”

on page 19.

UPLINK/SWITCH INTERFACES

Table 3 lists the 24-Port Copper switch and the

MGBIC modules that can be added to the switch.

The MGBIC modules are added to specific SFP ports

to provide connectivity for ISL ports.