Orbit Display
The Orbit Display system includes your choice of display
screen, an industrial computer with a customized operating
system, and software that communicates with one or more
Orbit 60 systems. The system can be certified for hazardous
locations. Condition monitoring data is communicated to
external displays via a Display Port or VGA connection.
Touchscreen connection can use USB or Serial connection.
The Orbit Display shows Orbit 60 machinery protection
system information such as:
• Direct measurements
• 1X measurements
• Gap measurements
• Measurement alarms
• System event list
• Alarm event list
The standard tabs show direct measurements, 1x filtered
vibration measurements, gap values, and other trended
variables.
Display Placement
Expensive KVM Extenders are not needed to place displays far
away from Orbit 60 installation locations. Since the Orbit
Display connects to Orbit 60 chassis via standard Ethernet
network connections, the Orbit 60 Display system can be
placed anywhere your Ethernet network infrastructure
supports. The display location is only limited by security and
network infrastructure necessary to support Orbit Display.
It is possible to place Orbit Display in a variety of locations:
• Physically adjacent to Orbit 60 chassis
• Next to the machines being monitored
• In a local or remote control room
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved