Power Engineering 
K-JIANG
NameDescriptionContent
Current Location:

Motorola MVME712M Transition Module

From:Motorola | author:Mr.Chen | Time :2024-07-05 | 1042 view: | 🔊 Click to read aloud ❚❚ ▶ | Share:

Description.

The MVME712M is an I/O transition module for Motorola MPU VME Modules, VME Processor Modules, Embedded Controllers, and Single Board Computer (SBC) series processor modules.

The MVME712M is used as an interface between the processor module and its peripherals. The purpose of this module is to provide rear-panel The purpose of this module is to provide rear-panel industry-standard connectors to simplify the customer's external cable requirements.

P2 adapter boards and cables are provided for interconnecting the MVME712M to peripheral devices. interconnecting the MVME712M to the MVMExxxx. the P2 adapter assembly transfers I/O signals and ground from the P2 connector on the chassis backplane to the MVME712M, and from the P2 adapter assembly to the MVME712M. at the VME Module MPU connection. At the VME module MPU connection, the P2 adapter assembly transfers I/O signals and ground from the P2 connector on the chassis backplane to the MVME712M.

The MVME712M routes the signals to four serial ports, which are realized through four industry standard DB-25 connectors on the MVME712M. Serial Ports. The serial ports can be configured as EIA-232-D DTE or DCE via jumpers on the MVME712M. The serial ports can be configured as EIA-232-D DTE or DCE via jumpers on the MVME712M.

The MVME712M also has an Ethernet port, a SCSI port, and a printer port on the front panel. Printer Port. In addition, the MVME712M routes EIA-232-D Port 2 signals to the internal modem. signal to the internal modem.

MVME712M Transition Module

The MVME712M features include

Four 25-pin multi-protocol EIA-232-D serial ports (via P2 adapter)

One independent printer port (via P2 adapter)

Small Computer System Interface (SCSI) shielded connector bus interface (via P2 adapter) for connecting internal and external devices

Green LED on module indicates terminator power supply

Yellow LED on module indicates transceiver power

SCSI termination resistor mounted on the socket for end-of-cable or middle-of-cable configurations

Modem interface on module

RFI protection on front panel

Electrostatic discharge (ESD) protection on front panel

P2 adapter board

The MVME712M requires the use of the P2 Adapter Board.

Connectors that allow SCSI cables to be connected to other SCSI devices and/or to the MVME712M via flat ribbon cables

SCSI termination resistors mounted in sockets for end-of-cable or middle-of-cable configurations

Develop termination power on P2 adapter from +5 Vdc on connector P2 and fuse (1 A) on P2 adapter.

Connect the EIA-232-D port, printer port, SCSI and Ethernet signals to the connectors on the MVME712M

Cooling Requirements

Motorola VME modules are specified, designed, and tested to operate reliably with forced-air cooling over the incoming air temperature range of 0 degrees Celsius to 55 degrees Celsius (32 degrees Fahrenheit to 131 degrees Fahrenheit).

Temperature qualification was performed in a standard Motorola VMEsystem 1000 enclosure. 25-watt load boards were inserted in two card slots, one on each side, adjacent to the board under test to simulate a high power density system configuration. Three axial fans, each rated at 71 CFM, were mounted directly below the MVME card box. the temperature of the incoming airflow was measured between the fan assembly and the card box, with the airflow encountering the module under test first.

The test software executes as the module is affected by changes in ambient temperature. Case temperatures of critical high power density integrated circuits are monitored to ensure that component vendor specifications are not exceeded.

While the exact amount of airflow required for cooling depends on the ambient air temperature as well as the type, number, and location of boards and other heat sources, typically as little as 5 CFM of airflow across the module is sufficient. In environments with lower maximum ambient temperatures, less airflow is required to cool the module.

Under more favorable thermal conditions, increased airflow will allow the module to operate reliably in environments above 55 degrees Celsius. It is important to note that in addition to the rated CFM of the air pusher, there are several factors that determine the actual amount of air flowing through the module.

  • Yokogawa PW501 Power Supply Unit
  • Basler Electric PT PT Sensing Card
  • Basler Electric IDP-1201 Interactive Display Panel
  • Basler Electric DXCB-2 De-Excitation / Crowbar Module
  • Basler Electric FGD-2 Field Ground Detection
  • Basler Electric IT-2 Isolation Transducer
  • Basler Electric DIOM-2 Digital Input Output Module
  • Basler Electric AIOM-2 Analog Input Output Module
  • Basler Electric BCM-2 Bridge Control Module
  • Basler Electric ECM-2 Excitation Control Module
  • Basler Electric SSR 32-12 Static Voltage Regulator 9 1859 00 100
  • Basler Electric TRR00696 TRANSFORMER; 346/380/415V PRI, 115 V SEC 1KVA, 50/60HZ
  • Basler Electric AEC63-7 Analog Excitation Controller 220-277v 50-60hz
  • Basler Electric BE1-25 M1EA6PA5S1F SOLID STATE TIME OVERCURRENT RELAY
  • Basler Electric 9 1049 04 100 PC BOARD
  • BASLER 125-12 STATIC VOLTAGE REGULATOR
  • Basler Electric Reactor BE12819001, 3.84 KVA
  • Teradyne 535-100-00 Basler Electric 9368200100 Power Supply
  • Basler Electric BE4-51 Electric Time Overcurrent Relay
  • Basler Electric 9 2849 00 101 Desc Power Module
  • BE1-67 B1E Z2J A3C3F Basler Electric Directional OC Relay
  • Basler Electric PRP110 90 55600 100 Reverse Power Solid State Protective Relay
  • Basler Electric BE30631001 Transformer
  • Basler Electric SSR 32-12 Static Voltage Regulator Sensing 120-600V 50/60/400Hz
  • Basler Electric MVC236 / MVC236 Manual Voltage Control
  • Basler Electric 9040000100UFOV UNDER FREQUENCY/OVERVOLTAGE PROTECTIVE MODULE
  • Basler Electric SR4A2B10A3E / SR4A2B10A3E Static Voltage Regulator
  • Basler Electric BE1-25 M1EA7TN5R1F SOLID STATE TIME OVERCURRENT RELAY
  • Basler Electric BE 12296 001 HOBART 111983-2 TRANSFORMER
  • Basler Electric 905970-104 REV.M VOLTAGE REGULATOR
  • Basler 9262103004 Voltage Regulator Board For Basler DECS-4+A451:A48200
  • Designed to Protect PWM-type Basler ICRM-7 Inrush Current Reduction Module
  • Basler Electric KR4F VOLTAGE REGULATOR 9042600100 600V 50/60Hz
  • Basler Electric 9 2226 00101 NSNB
  • Basler Electric BE303280001 Transformer
  • Basler Electric BE1-25 M1FA6PA4S0F SOLID STATE TIME OVERCURRENT RELAY
  • Basler Electric SR4A2B05B3E Static Voltage Regulator SVR w/o Cover
  • Basler Electric BE127 Under Voltage Relay A3EA1JA0S5F
  • Basler Electric 3300C03B1028-G01 Super Spike Suppressor
  • Basler Electric BE32965001 Transformer With Cissell TU12874 Timer Board Kit
  • Basler Electric D90 96801 100 PCB CARD
  • BASLER BE1-81 / BE1-81-T1E-E1C-A0N1F / 9106400 UNDERFREQUENCY SS RELAY DAMAGED
  • Basler Electric 3280024-14 AGP3600-T1-D24 12.1" FLEX Network HMI Touch
  • Basler Electric SR4A2B10B1A Static Voltage Regulator
  • Basler Electric SR8A2B05B3A Static Voltage Regulator
  • Basler Electric BE34062001 G18 Transformer N And P Voltage F840101
  • Basler 9269101107 Voltage Regulator Board For Basler DECS-400
  • Basler Electric SR32A-2B13B3E STATIC VOLTAGE REGULATOR
  • DECS100-B15 Basler Automatic Voltage Regulator For Basler Electric Generator
  • Basler Electric SR8A-2B15B3A STATIC VOLTAGE REGULATOR SR8A2B15B3A
  • Basler Electric SR4A-2B16B3A STATIC VOLTAGE REGULATOR
  • Basler Electric SR4A-2B16B3E Static Voltage Regulator
  • Basler Electric SR8A2B06B3A STATIC VOLTAGE REGULATOR
  • Hirschmann (Belden)MACH1000, RSPx, RSR and GREYHOUND Power Cord - Schuko 2,5m
  • Hirschmann (Belden)PC150/72V/48V-IP67 DC/DC converter with 48 V power output
  • Hirschmann (Belden)RPS 260/PoE EEC 48 - 56 V DC rail power supply unit
  • Hirschmann (Belden)RPSS120-24V EEC 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS480-48V EEC 48 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS240-48V EEC 48 V DC DIN rail power supply unit
  • Hirschmann (Belden)PC150/110V/54V DC/DC converter with 54 V power output
  • Hirschmann (Belden)RPS 80 EEC 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS75-24V EEC 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPS 15, Rail Power Supply 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS240-48V EEC 48 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPS 120 EEC 24 V DC DIN rail power supply unit
  • GE Energy MVDL1000-47931101 Power Conversion Module 690V 1000A
  • GE Energy MVDL8 00-479 3110 1-A Power Conversion Delta Module for MV3000 Drive
  • METSO D201925 ACN CS Controller Module DCS DNA System Processor
  • Hirschmann GMM20-MMMMMMMMSZ9HHS9 GREYHOUND1042 Fast Ethernet media module
  • Hirschmann GRS1042-6T6ZTLL12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-AT2ZTLL12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-6T6ZTHH12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-AT2ZTHH12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-AT2ZSHH00Z9HHSE2A99 Modular managed Industrial Switch
  • Hirschmann GRS1042-6T6ZSHH00Z9HHSE2A99 Modular managed Industrial Switch
  • Hirschmann GRM20-ZZZZZZZZSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-ZZZZTTTTSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-TTTTTTTTSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-MMMMTTTTSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-MMMMMMMMSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRS1030-8T8ZSMMV9HHSE2S 8 x FE TX + 8 x FE SFP + 4 x FE/GE Combo + up to 8 x FE ports via additional media modules
  • Hirschmann GRS1030-16T9SMMV9HHSE2S 16 x FE TX + 4 x FE/GE Combo + up to 8 x FE ports via additional media modules
  • Hirschmann GRS1020-8T8ZSMMV9HHSE2S 8 x FE TX + 8 x FE SFP + up to 8 x FE ports via additional media modules
  • Hirschmann GRS1020-16T9SMMV9HHSE2S 16 x FE TX + up to 8 x FE ports via additional media modules
  • GE UCECH1A UCSE Mark VIe Controller
  • GE IS420UCSEH2C UCSE Mark VIe Controller
  • GE IS220UCSBH4A UCSE Mark VIe Controller
  • GE IS220UCSBH3A UCSE Mark VIe controller module
  • GE IS220UCSBH1A UCSE Mark VIe controller module
  • GE IS420UCSEH2B UCSE Mark VIe controller module
  • GE IS420UCSEH2A UCSE Mark VIe controller module
  • Hirschmann Basic Switches - RSB20-0900VVM2SAABHH Ethernet/Fast Ethernet-Switch
  • Hirschmann BXP62-28TX-EECC-HV-3A-BP HiOS 3A BXP
  • Hirschmann BXP62-28TX-EECC-HV-2A-BP BXP HiOS 2A
  • Hirschmann BXP62-20TX-EECC-HV-3A-BP HiOS 3A
  • Hirschmann BXP62-20TX-EECC-HV-2A HiOS 2A BXP
  • Hirschmann BXP62-28TX-EECC-HV-3A HiOS 3A BXP
  • Hirschmann BXP62-28TX-EECC-HV-2A HiOS 2A BXP Switches
  • Hirschmann BXP62-20TX-EECC-HV-3A BXP Switches
  • Hirschmann BXP62-20TX-EECC-HV-2A-BP BXP Switches
  • Hirschmann RSB20-0900VVM2TAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0900MMM2TAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0900S2TTAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0900M2TTAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0800S2S2TAABE Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0800M2M2TAAB Ethernet Switch EEC MM SC RSB20 Series
  • Hirschmann RSB20-0800T1T1TAAB Ethernet Switch EEC RSB20 Series
  • Hirschmann RSB20-0900VVM2SAAB Ethernet Switch 942014008 RSB20 Series
  • Hirschmann RS30-2402O6O6SDAE Ethernet Switch; Managed; Enhanced; 24xRJ45; 2x1Gig Fiber; 943434039
  • Hirschmann RSB20-0900MMM2SAAB Ethernet Switch 942014007
  • Hirschmann RSB20-0900S2TTSAAB Ethernet Switch, Managed, 9 Port, 12 to 24 VDC, SM SC, RSB20 Series
  • Hirschmann RSB20-0900M2TTSAAB Ethernet Switch, Managed, 9 Port, 12 to 24 VDC, MM SC, RSB20 Series
  • Hirschmann RSB20-0900ZZZ6SAAB Ethernet Switch, Managed, 9 Port, 12 to 24 VDC, RSB20 Series
  • Hirschmann RSB20-0800S2S2SAAB Ethernet Switch, Managed, 8 Port, 12 to 24 VDC, SM SC, RSB20 Series
  • Hirschmann RSB20-0800M2M2SAAB Ethernet Switch
  • Hirschmann RSB20-0800T1T1SAAB Ethernet Switch, Managed, 8 Port, 12 to 24 VDC, RSB20 Series
  • Hirschmann 4C4C4C4C999 16 RJ45/SFP Combo Ports (support 100 and 1000 Mbit/s SFP)
  • Hirschmann MAR1142 Full Gigabit Ethernet Switch with Ports on the rear, PoE
  • Hirschmann MAR1140 Full Gigabit Ethernet Switch with Ports on the rear
  • Hirschmann MAR1042 Full Gigabit Ethernet Switch with PoE
  • Hirschmann MAR1132 Gigabit Ethernet Uplink with Ports at the bcak and 4 Ports PoE
  • Hirschmann MAR1130 Gigabit Ethernet Uplink with Ports at the bcak
  • Hirschmann MAR1032 Gigabit Ethernet Uplink with 4 Ports PoE
  • Hirschmann MAR1122 Fast Ethernet Uplink with Ports at the back and 4 Ports PoE
  • Hirschmann MAR1120 Fast Ethernet Uplink with Ports at the back
  • Hirschmann MAR1022 Fast Ethernet Uplink with 4 Ports PoE
  • Hirschmann MACH 1040 Full Gigabit Rack Mount Switches
  • Hirschmann MAR1030 Ruggedized managed Ethernet Switches, 19" cabinet mount