GE VMIC VMIVME-7695 Single-Slot Pentium II Embedded Module

- Pentium® II Processor-Based Single Board Computers (SBCs)

- Special features for embedded applications include

- M-Systems Flash DiskOnChip® (optional)

- 16 Mbyte IDE Flash drive

- Three programmable 16-bit timers

- 32 Kbyte battery-backed SRAM

- Software-selectable watchdog timer with reset

- Supports Ethernet remote startup

- Supports VMEbus P2 connection to hard disk/floppy drive

- PMC Expansion Interface with VMEbus P2 Inputs/Outputs

- Supports VME64 modes: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32

- VMEbus interrupt handler, interrupter and system controller

- Includes real-time end-to-end bit conversion hardware for small-end and big-end data interfaces (Patent No. 6.032.212)

- Enhanced bus error handling

- Passive heat sink design (no moving parts)

- Standard features include

- Pentium II Embedded Module (333 MHz)

- Up to 512 Mbyte SDRAM using three 144-pin SODIMMs

- 64-bit S3 Trio 3D AGP SVGA controller with 4 Mbyte SGRAM

- Onboard Fast Ethernet controller supporting 10BaseT and 100BaseTX interfaces

- Onboard Ultra DMA/33 hard disk drive and floppy drive controller with VMEbus P2 input/output interface

- Two high-performance 16550-compatible serial ports (Requires VMIACC-0045 or separate connector adapter.)

- Enhanced parallel port supporting ECP/EPP mode (Requires VMIACC-0045 or separate connector adapter.)

- Front panel PS/2 keyboard and mouse ports

- Built-in real-time clock and micro-speaker

- Dual USB ports

- Supported Operating Systems

- Windows NT®/Windows® 2000

- VxWorks

- VxWorks

- Solaris

- QNX Solaris

- LynxOS

Applications

- Analog

- Instrumentation

- Industrial Controls

- Process Control and Monitoring

- Factory Automation

- Intelligent Networking PLC Controllers

- Automated Testing

- Data Acquisition

Microprocessor - The VMIVME-7695 brings the Intel® Pentium II processor with MMX™ to the VME bus, providing a processor speed of 333 MHz.

The Pentium II processor has 32-bit addressing and a 64-bit data bus. Its superscalar architecture allows three instructions per clock cycle.

Dynamic branch prediction units, separate instruction and data caches, and MMX technology also enhance the performance of the Pentium II processor.

The Pentium II processor also features a dual independent bus architecture providing 512 Kbytes of internal L2 cache for high bandwidth and performance.

Memory - The VMIVME-7695 offers up to 512 Mbytes of system memory options with up to three SODIMMs installed.

The on-board DRAM is dual-ported to the VME bus.

DiskOnChip - The VMIVME-7695 offers the option of accessing 72. 144. or 288 Mbytes of memory via M-Systems' DiskOnChip.

This memory can be used as boot flash or as an additional standard drive installed by the BIOS. No additional software is required.

The DiskOnChip can be used as the only drive in the system or as a second drive, e.g. with the VMIVME-7455 CD-ROM drive.

Ethernet Controller - The VMIVME-7695 supports Ethernet LANs through the Intel 21143 Ethernet Controller.

10BaseT and 100BaseTX transmission is supported and the interface can be accessed through the RJ45 connector on the front panel.The VMIVME-7695 includes a Lanworks Technologies, Inc.

The VMIVME-7695 includes Lanworks Technologies, Inc.'s Remote Boot BIOS, which allows users to remotely boot a variety of operating systems using the Ethernet interface.Lanworks Technologies, Inc.'s BIOS provides the following features:

- Support for RPL, TCP/IP BootP, TCP/IP DACP, NetWare 802.3. NetWare 802.2. and NetWare EthII protocols

- Unrivaled boot sector virus protection

- Detailed boot configuration screens

- Comprehensive diagnostic capabilities

- Option to disable local boot function

- Dual-boot option allows user to select network or local startup