Motorola 3496B01A MVME712M/M P2 Adapter Board

Features:

4 25-pin multi-protocol EIA-232-D serial ports

The MVME712M is an I/O converter module for Motorola MPU VME Modules, VME Processor Modules, Embedded Controllers, and Single Board Computer (SBC) series processor modules.

The MVME712M is compatible with the MVME147. MVME1600. MVME162. MVME2600. MVME167. MVME2700. MVME177. MVME3600. MVME4600.

The MVME712M is used as an interface between the processor module and its peripherals. The purpose of this module is to provide rear panel industry standard connectors to simplify external customer cable requirements.

The P2 adapter assembly routes I/O signals and ground from the P2 connector on the chassis backplane (at the VMEmodule MPU connection) to the MVME712M.

The MVME712M routes signals to four serial ports that have four industry-standard DB-25 connectors on the front panel.

The serial ports can be configured as EIA-232-D DTE or DCE via a patch cable arrangement on the MVME 712M.

The MVME712M also has an Ethernet port, a SCSI port, and a printer port on the front panel.

In addition, the MVME712M routes EIA-232-D Port 2 signals to the internal modem.

The MVME712M requires the use of the P2 adapter board, which is not included.

The features of the P2 adapter board include:

-Connectors that allow SCSI cables to be connected to other SCSI devices and/or to the MVME712M via a flat ribbon cable.

-SCSI termination resistors mounted in sockets for cable ends or in the middle of the cable configuration.

-Terminator power developed from +5 Vdc on connector P2 on P2 adapter, and fuses (2 A) on P1 adapter

-Connects EIA-232-D port, printer port, SCSI and Ethernet signals to MVME712M connectors